3RECORD SET
The following settings are carried out using the shuttle dial and jog dial.
zVertical cursor movement: Turn the jog dial.
zCursor movement to the right: Turn the shuttle dial clockwise.
zModification of values: Turn the shuttle dial clockwise, and then with the setting value flashing, turn the jog dial.
zConfirmation of values: Turn the shuttle dial clockwise.
9 Set “PICTURE QUALITY”.
See P.55
10 Set “AUDIO RECORDING”.
See P.55
11 Turn the shuttle dial counter-clockwise.
<WARNING> screen is displayed.
12 Turn the jog dial to select “YES”, and then turn the shuttle dial clockwise.
The display returns to the <EASY SETUP> screen.
13 Press the [EXIT] button.
The setting procedure is ended and the display returns to the normal screen.
EXIT
zThe recording rate is automatically calculated based on recording settings and the number of connected cameras, and this is indicated by “RECORDING DURATION”. If a valid figure cannot be calculated, “ERROR!” will be displayed.
zWhen simple recording settings and individual settings are both set, the most recent settings override previous settings.
zEasy setup settings cannot be used with program recording or
Displaying the recording areas
Use the following procedures to confirm the hard disk’s total recording capacity and also the allocation for each recording area.
1 Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is displayed.
MENU
2 Turn the jog dial to select “2.RECORD SET”, and then turn the shuttle dial clockwise.
The <RECORD SET> screen is displayed.
3 Turn the jog dial to select “2. RECORDING AREA SET”, and then turn the shuttle dial clockwise.
The <RECORDING AREA SET> screen is displayed.
(1)
(2)
(3)
(4)
(1) | Displays the total capacity |
of the hard disk. |
(2) | Sets the capacity of the | Normal | |
recording | |||
normal recording area. | |||
|
| area | |
| Sets the capacity of the | Alarm | |
(3) | recording | ||
| alarm recording area. | area |
(4) | Sets the capacity of the | Archive area |
| archive area. |
|
English | 57 |
