Sanyo DSR-3506P Setting the security lock, Turn the jog dial to select a character 0 to 9, a to Z

4GENERAL SET

Setting the security lock

Use the procedures described below to set a passwords and to prevent unauthorized users from operating the digital video recorder. If a button is pressed while the security lock is in operation, a buzzer will be sounded. Be sure to make a note of the passwords that are set.

„Operation after setting passwords

Two password types can be set, one for administrators and one for users. The table below gives typical password setting combinations and lists how the digital video recorder operates for each.

	Typical setting		Operation
LEVEL	PASSWORD (4 - 8)	USE	All operations are locked.
ADMIN	123456AB	ON
			Enter the user password
USER	AB123456	ON
			to enable playback
REC CONTROL		: ADMIN
			operations.
			Enter the administrator
			password to enable all
			operations.
ADMIN	123456AB	ON	All operations are locked.
USER	AB123456	ON
			Enter the user password
REC CONTROL		: USER
			to enable playback and
			recording operations.
			Enter the administrator
			password to enable all
			operations.
ADMIN	123456AB	ON	Recording and menu
USER	--------	OFF	operations are locked.
REC CONTROL		: ADMIN	Playback operations are
			locked.
			Enter the administrator
			password to enable all
			operations.
ADMIN	123456AB	ON	Recording and menu
USER	--------	OFF	operations are locked.
REC CONTROL		: USER	Playback operations are
			locked.
			Enter the administrator
			password to enable all
			operations.
ADMIN	--------	OFF	This setting cannot be
USER	--------	ON
			carried out.
REC CONTROL		: ADMIN
ADMIN	--------	OFF	All operations are
USER	--------	OFF	possible.
REC CONTROL		: ADMIN	The security lock is not
			activated.
			(Default setting)

Setting the administrator password

Passwords comprise between 4 and 8 alphanumeric characters.

Characters that can be entered in passwords: 0 to 9, A to Z

Example: Setting “123456AB” as a password

1 Press the [MENU] button and turn the jog dial to select “3. GENERAL SET”, and then turn the shuttle dial clockwise.

The <GENERAL SET> screen is displayed.

MENU

2 Turn the jog dial to select “3. SECURITY LOCK SET”, and then turn the shuttle dial clockwise.

The <SECURITY LOCK SET> screen is displayed. The cursor moves to “ADMIN”.

3 Turn the shuttle dial clockwise.

The first password character “-” flashes.

ADMIN -------- OFF

4 Turn the jog dial to select a character (0 to 9, A to Z).

Example:

Turn the jog dial to select “1”.

ADMIN 1------- OFF

5 Turn the shuttle dial clockwise.

The second password character “-” flashes.

6 Use the same procedure to set “123456AB”.

English 79