MS-6763 M-ATX Mainboard
Run VGABIOS if S3 Resume
Selecting [Enabled] allows BIOS to call VGABIOS to initialize the VGA card when system wakes up (resumes) from S3 sleep state. The system resume time is shortened when you disable the function, but system will need an AGP driver to initialize the VGA card. Therefore, if the AGP driver of the card does not support the initialization feature, the display may work abnormally or not function after resuming form S3.
Power Management
This item is used to select the degree (or type) of power saving and is related to these modes: Suspend Mode and HDD Power Down. There are three op- tions for power management:
Min Saving | Minimum Power Management. Suspend Mode=1 Hour |
Max Saving | Maximum Power Management. Suspend Mode=1 Min |
User Define | Allows end users to configure each mode separately. |
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank | This selection will cause the system to turn off |
| the vertical and horizontal synchronization ports |
Blank Screen | and write blanks to the video buffer. |
This option only writes blanks to the video | |
DPMS | buffer. |
Initial display power management signaling. |
Video Off In Suspend
This option enables the monitor to be turned off during the suspend mode. Settings: Yes, No.
Suspend Type
This setting allows you to select the type of Suspend mode. Setting options: Stop Grant (saves the state of the entire system to disk and then powers off the system), PwrOn Suspend (the CPU and core system remain powered on in a very
MODEM Use IRQ
This determines the IRQ in which the MODEM can use. Activity of the se- lected IRQ always awakens the system. Settings: 3, 4, 5, 7, 9, 10, 11, NA..
