Hardware Setup
Memory
The mainboard provides four 184-pin unbuffered PC3200/PC2700/ PC2100 DDR DIMMs and supports the memory size up to 4GB. To operate properly, at least two DIMM modules must be installed onboard.
| | | | | DDR DIMM Slots |
Memory Speed/CPU FSB Support Matrix | (DIMM 1~4) |
|
| | | | | |
| | DDR200 | DDR266 | DDR333 | DDR400 |
| FSB400 | V | V | X | X |
| | | | | |
| FSB533 | V | V | V | X |
| | | | | |
| FSB800 | V | V | V | V |
| | | | | |
DDR Population Rules
Install at least one DIMM module on the slots. Each DIMM slot supports up to a maximum size of 1GB. Users can install either single- or double-sided modules to meet their own needs. Please note that each DIMM can work respectively for single-channel DDR, but there are some rules while using dual-channel DDR (Please refer to the suggested DDR population table on p. 2-8).Users may install memory modules of different type and density on different-channel DDR DIMMs. However, the same type and density memory modules are necessary while using dual-channel DDR, or instability may occur.
