MSI 865GM3 manual AC97 Modem, Onboard LAN Device for 865PE, Onboard 1394 Device for 865PE

BIOS Setup

AC97 Modem

Auto allows the mainboard to detect whether a modem is used. If a mo- dem is detected, the onboard AC’97 modem controller will be enabled; if not, it is disabled. Disable the controller if you want to use other con- troller cards to connect a modem. Settings: Auto, Disabled.

Onboard LAN Device (for 865PE)

This setting is used to enable/disable the onboard 10/100Mbps LAN controller. Setting options: Disabled, Enabled.

Onboard 1394 Device (for 865PE)

This setting is used to enable/disable the onboard IEEE1394 controller. Setting options: Disabled, Enabled.

Super IO Device

Press <Enter> to enter the sub-menu and the following screen appears:

Onboard FDC Controller

Select Enabled if your system has a floppy disk controller (FDD) in- stalled on the system board and you wish to use it. If you install add-on FDC or the system has no floppy drive, select Disabled in this field. The settings are: Enabled and Disabled.

Onboard Serial Port 1/Port 2

Select an address and corresponding interrupt for the first and second serial ports. The settings are: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto.

3-19