![](/images/new-backgrounds/1270029/270029103x1.webp)
Bank Interleave
This field selects
SDRAM Burst Length
This setting allows you to set the size of
SDRAM1TCommand
This setting controls the SDRAM command rate. Selecting Enabled allows SDRAM signal controller to run at 1T (T=clock cycles) rate. Selecting Disabled makes SDRAM signal controller run at 2T rate. 1T is faster than 2T. Setting options: Disabled, Enabled.
FastCommand
This item controls the internal timing of CPU. Selecting Ultra allows CPU to handle data/instructions at the fastest speed. Fast enables CPU to handle at a faster speed, while Normal let CPU handle them at the slowest rate.
Fast R-2-R Turnaround
Burst read operation can be interrupted by new read of any bank. Random column access is allowed. READ to READ interval is minimum 1 CLK. Selecting Enabled to shorten the turnaround interval to improve the performance. Setting options: Disabled, Enabled.
AGP Timing Control
Press <Enter> and the following