The system initializes the installed AGP card first. If the AGP card is not available, it will initialize the PCI VGA card.
The system initializes the installed PCI VGA card first. If the PCI VGA card is not available, it will initialize the AGP card.
BIOS Setup
For better PCI performance, you should set the item to higher values. Settings range from 32 to 248 at a 32 increment.
PCI IDE BusMaster
Set this option to Enabled to specify that the IDE controller on the PCI local bus has bus mastering capability. Settings options: Disabled, Enabled.
PrimaryGraphicsAdaptor
This setting specifies which VGA card is your primary graphics adapter. Setting options are:
AGP
PCI
PCI Slot1 IRQ, PCI Slot2/5 IRQ, PCI Slot3 IRQ, PCI Slot4 IRQ
These items specify the IRQ line for each PCI slot. Setting options: 3, 4, 5, 7, 9, 10, 11, Auto. Selecting Auto allows BIOS to automatically determine the IRQ line for each PCI slot.
