▶SATA1~6
Press <Enter> to enter the
▶Device / Vendor / Size
It will show the device information that you connected to the IDE/ SATA/ ESATA connector.
Important
SATA1~6 are appearing when you connect the HD devices to the IDE/ SATA connec- tors on the mainboard.
▶Hold on
The setting determines whether the system will stop of an error is detected at boot. When the system stops of the errors preset, it will halt on for 15 seconds and then au- tomatically resume its operation. Available options are:
[All Error] | The system stops when any error is detected. |
[No Error] | The system doesn’t stop for any detected error. |
▶System Information
Press <Enter> to enter the
This