MSI RG60G

2.2 Procedure for Hardware Installation

1.Decide where to place your Wireless Broadband Router

You can place your Wireless Broadband Router on a desk or other flat surface, or you can mount it on

awall. For optimal performance, place your Wireless Broadband Router in the center of your office (or your home) in a location that is away from any potential source of interference, such as a metal wall or microwave oven. This location must be close to power and network connection.

2.Setup LAN connection

a.Wired LAN connection: connects an Ethernet cable from your computer’s Ethernet port to one of the LAN ports of this product.

b.Wireless LAN connection: locate this product at a proper position to gain the best transmit performance.

Figure 2-3 Setup of LAN and WAN connections for this product.

3.Setup WAN connection

Prepare an Ethernet cable for connecting this product to your cable/xDSL modem or Ethernet backbone. Figure 2-3 illustrates the WAN connection.

4.Power on

Connecting the power cord to power inlet and turning the power switch on, this product will automatically enter the self-test phase. When it is in the self-test phase, the indicators M1 will be lighted ON for about 10 seconds, and then M1 will be flashed 3 times to indicate that the self-test operation has finished. Finally, the M1 will be continuously flashed once per second to indicate that this product is in normal operation.

Turbo 802.11b/g 4 Port Wireless Broadband Router

7

 

Page 13
Image 13
MSI RG60G Procedure for Hardware Installation, Decide where to place your Wireless Broadband Router, Setup LAN connection