Set TCP/IP Protocol for Working with NAT Router | MSI RG60G specification

MSI RG60G

e.Select Microsoft item in the manufactures list. And choose TCP/IP in the Network Protocols. Click OK button to return to Network window.

f.The TCP/IP protocol shall be listed in the Network window. Click OK to complete the install procedure and restart your PC to enable the TCP/IP protocol.

A.2 Set TCP/IP Protocol for Working with NAT Router

a.Click Start button and choose Settings, then click Control Panel.

b.Double click Network icon. Select the TCP/IP line that has been associated to your network card in the Configuration tab of the Network window.

Turbo 802.11b/g 4 Port Wireless Broadband Router	61

Image 67

MSI RG60G manual Set TCP/IP Protocol for Working with NAT Router

Contents

MSI RG60G Luxembourg Ieee 802.11b/g and Bluetooth 2.4 GHz operationIeee 802.11b/g und Bluetooth 2.4 GHz Betrieb Italy Hinweise zur Reichweite Operating rangeMSI Technology GmbH Revision History Date First Release July Important Safety Precautions Table of Content Functions and Features Ieee 802.11b compatible 11M High speed for wireless LAN connectionStatistics of WAN Supported Roaming System time Supported SPI Mode SupportedSupport WPA-PSK and WPA DoS Attack Detection Supported Packing List Panel Layout Hardware Installation Rear Panel Antenna LAN Ports 1~4 Power WAN Port Setup WAN connection Procedure for Hardware InstallationDecide where to place your Wireless Broadband Router Setup LAN connection Ping Make Correct Network Settings of Your Computer MSI RG60G Configuring Wireless Broadband Router Wizard Start-up and Log Setup Press Change IP Setting WAN Type, IP Mode Dynamic IP Address Static IP Address Pptp PPP over Ethernet 1.6 L2TP MSI RG60G Wireless Setting and 802.1X setting ＊ Wireless settings Radius Shared Key ＊ 802.1X Setting WPA-PSK WPA2-PSK AES WPA2 AES WPA1/WPA2 3 WDS Dynamic DNS Dhcp Server Click More Advanced SPI Mode Basic Setting Discard Ping from WAN sideDoS Attack Detection MAC Address Control IP Address Packet Filtering Example ＊ Inbound Filter Field MSI RG60G ＊ Privilege IP Addresses Range ＊ Domain Filter EnableDomain Filtering ＊ Domain Filter ＊ Log DNS Query ＊ Enable URL Filtering ＊ URL Blocking Enable MSI RG60G Routing Table Destination Subnet Mask Gateway Hop Enabled Click Add New Rule Schedule Rule Edit After configure Rule 1à Schedule EnableDelete MSI RG60G Virtual Server ＊ Non-standard FTP port 9 DMZ ＊ IP Address of DMZ Host Special AP Change Password AdministrationRecommended Backup Setting Firmware Upgrade Reboot Reset to factory defaultSystem Time ＊ Time Zone Remote Access ＊ Remote Administrator Host/Port＊ Get Date and Time by NTP Protocol ＊ Time Server Network wake-up ＊ MAC Address for Wake-on-LAN ＊ Administrator Time-out Status Diagnostic System Log System Status ＊ Smtp Server IP and Port ＊ E-mail Alert EnableLog Notification ＊ IP Address for Syslog ＊ Set Community Snmp Setting＊ Enable Snmp ＊ Get Community Configuring Turbo Mode With Client Select Optimize for performance mode Configuration Confirmation Install TCP/IP Protocol into Your PC Appendix a TCP/IP Configuration for Windows 95/98 Set TCP/IP Protocol for Working with NAT Router MSI RG60G MSI RG60G Configure IP manually MSI RG60G PC2 Authentication ServerEquipment Details PC1 Setup DUT DUT and Windows 2000 Radius Server SetupConfiguration Setup Windows 2000 Radius Server Enable Ieee 802.1X access control Setup Network adapter on PC Smart card or other Certificate Properties Windows 2000 Radius server Authentication testing Certificate information on PC1 DUT authenticate PC2 using PEAP-TLS Appendix C WPA-PSK and WPA Method1 WPA-PSK MSI RG60G Method2 Back to Connection MSI RG60G Method WPA MSI RG60G Then Choose certificate like above MSI RG60G Result Choose View available Wireless Networks like below MSI RG60G Reset to factory Default Appendix D FAQ Troubleshooting Operational & Functional Characteristic Hardware and Port Characteristic Environment, Certification and Reliability Wireless Support