MSI RG60G manual PPP over Ethernet, Pptp

MSI RG60G

4.3.1.4 PPP over Ethernet

1.PPPoE Account and Password: the account and password your ISP assigned to you.

For security, this field appears blank. If you don't want to change the password, leave it empty.

2.PPPoE Service Name: optional. Input the service name if your ISP requires it. Otherwise, leave this field blank.

3.Maximum Idle Time: the amount of time of inactivity before disconnecting your PPPoE session. Set it to zero or enable Auto-reconnect to disable this feature.

4.Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The most common MTU value is 1492.

5.Connection Control: There are 3 modes to select:

Connect-on-demand: The device will link up with ISP when the clients send outgoing packets.

Auto-Reconnect(Always-on): The device will link up with ISP until the connection is established.

Manually: The device will not make the link until someone clicks the connect-button in the status-page.

4.3.1.5 PPTP

1.My IP Address and My Subnet Mask: the private IP address and subnet mask your ISP assigned to you.

2.Server IP Address: the IP address of the PPTP server.

3.PPTP Account and Password: the account and password your ISP assigned to you. If you don't intend to change the password, leave it blank.

4.Connection ID: optional. Input the connection ID if your ISP requires it.

5.Maximum Idle Time: the time of no activity to disconnect your PPTP session. Set it to zero or enable Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product will connect to ISP automatically, after system is restarted or connection is dropped.

Turbo 802.11b/g 4 Port Wireless Broadband Router 15