MTD 340 Thru 390 manual Model 340 Thru, Part Description, Part No

Model 340 Thru 345

Ref.	Part No.	Part Description
No.
1.	712-0392	Hex L-Stop nut 1/4-28
2.	736-3020	Flat Wash. .266” I.D. x .625” O.D.
3.	710-0599	Hex Washer Screw 1/4-20 x .5”
4.	711-0920	Belt Cover Bolt
5.	712-3004A	Hex Flange Top L-Nut 5/16-18
6.	710-0723	Hex Hd. Scr. 3/8-16 x 1.25” Lg.
7.	756-0313	Fl-Idler 2.12” O.D.
8.	786-0149	Idler Belt Keeper
9.	786-0144	Idler Bracket
10.	712-0266	Hex Cent. Jam Nut 3/8-16 Thd.
11.	786-0056	Belt Cover
12.	710-0599	Hex Washer Screw 1/4-20 x .5”
13.	786-0035A	Tine Shield
14.	710-3008	Hex Hd. Cap Scr. 5/16-18 x .75” Lg
15.	712-3004A	Hex Flange Top L-Nut 5/16-18
16.	686-0091	Chain Case Assembly Complete
18.	714-0149B	Internal Cotter Pin
19.	711-0415	Clevis Pin
20.	642-0005	Outer Tine Assembly L.H.
	642-0004	Outer Tine Assembly R.H.
21.	642-0003	Inner Tine Assembly L.H.
	642-0002	Inner Tine Assembly R.H.

Ref.	Part No.	Part Description
No.
22.	746-0918	Forward Clutch Cable
23.	786-0053	Tine Shield Bracket
24.	736-0171	L-Wash. 7/16” I.D.
25.	712-0240	Hex Nut 7/16-20 Thd.
26.	710-0502A	Hex Washer Screw 3/8-16 x 1.25”
27.	786-0145A	Engine Plate
28.	786-0039B	Bracket Cover
29.	736-0119	Lock Washer 5/16
30.	710-0107	Hex Bolt 5/16-24 x .5”
31.	756-0971	Inner Engine Pulley Half
32.	756-0972	Outer Engine Pulley Half
33.	736-0258	Flat Washer .385 ID x 1.0 OD
34.	736-0169	Lock Washer 3/8
35.	710-0191	Hex Bolt 3/8-24 x 1.25”
36.	736-0112	Bell-Wash. .525” I.D. x 1.5” O.D.
37.	712-3029	Hex Jam Nut 1/2-20 Thd. (Gr. 5)
38.	736-0312	Retainer Washer Bearing
39.	756-0585	Fl-Pulley 6” Dia.
40.	754-0428	V-Belt (Forward)
41.	750-0892	Spacer .64” Dia. x 2.4” Lg.
42.	748-0350	Pulley Mounting Adapter

19