Contents
OPERATOR’S MANUAL
Two-Stage Snow Thrower - E, F Style
MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO
Table of Contents
Finding and Recording Model Number
Customer Support
Warranty
Safety Labels
Restrict the use
in this manual and on the machine
Your Responsibility
Safe Operation
Practices
TrainingPreparation
in this manual and on the machine
Maintenance & Storage
Safe Operation Practices
Operation
Restrict the use
Setting Up Your Snow Thrower
3. Position the chute assembly over the base
Setting Up Your Snow Thrower
Adjustments
Auger Control
Skid Shoes
Operating
Your Snow
Thrower
Know Your Snow Thrower
Operating Your Snow Thrower
When engaged, the augers rotate and draw snow into the auger housing
Crank clockwise to discharge to the left
This handle is used to manually start the engine
Gas & Oil Fill-Up
Stopping The Engine
If your home’s
Electric Starter
Chute Clean-Out Tool
To Engage Drive
To Engage Augers
Recoil Starter
Making Adjustments
Making Adjustments
To adjust the skid shoes
Maintaining Your Snow Thrower
Engine
Gear Shaft
Wheels
Auger Belt Replacement
replacement auger belt
Maintaining Your Snow Thrower
proceed as follows
Maintaining Your Snow Thrower
3. a. Grasp the idler pulley and pivot it toward the right
Maintaining Your Snow Thrower
Friction Wheel Removal
Reassemble the side plates with a new rubber ring
Off-Season Storage
Preparing Engine
Preparing Snow Thrower
Trouble Shooting
Problem
Cause
Remedy
Styles E & F
Illustrated Parts List
To order replacement parts, contact
or visit
Styles E & F
Illustrated Parts List
Handle Assembly, Clutch Lock, LH
Handle Assembly, Clutch Lock, RH
631-04133
Styles E & F
Illustrated Parts List
To order replacement parts, contact
or visit
Page
Page
MANUFACTURER’S LIMITED WARRANTY FOR
��
�� ��
�
