Contents
Two-Stage Snow Thrower - E, F Style
OPERATOR’S MANUAL
MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO
Customer Support
Table of Contents
Finding and Recording Model Number
Warranty
in this manual and on the machine
Safety Labels
Restrict the use
Your Responsibility
TrainingPreparation
Safe Operation
Practices
in this manual and on the machine
Operation
Maintenance & Storage
Safe Operation Practices
Restrict the use
Setting Up Your Snow Thrower
3. Position the chute assembly over the base
Auger Control
Setting Up Your Snow Thrower
Adjustments
Skid Shoes
Thrower
Operating
Your Snow
Know Your Snow Thrower
Crank clockwise to discharge to the left
Operating Your Snow Thrower
When engaged, the augers rotate and draw snow into the auger housing
This handle is used to manually start the engine
If your home’s
Gas & Oil Fill-Up
Stopping The Engine
Electric Starter
To Engage Augers
Chute Clean-Out Tool
To Engage Drive
Recoil Starter
Making Adjustments
Making Adjustments
To adjust the skid shoes
Gear Shaft
Maintaining Your Snow Thrower
Engine
Wheels
Maintaining Your Snow Thrower
Auger Belt Replacement
replacement auger belt
proceed as follows
Maintaining Your Snow Thrower
3. a. Grasp the idler pulley and pivot it toward the right
Friction Wheel Removal
Maintaining Your Snow Thrower
Reassemble the side plates with a new rubber ring
Preparing Engine
Off-Season Storage
Preparing Snow Thrower
Cause
Trouble Shooting
Problem
Remedy
Styles E & F
To order replacement parts, contact
Illustrated Parts List
or visit
Styles E & F
Handle Assembly, Clutch Lock, RH
Illustrated Parts List
Handle Assembly, Clutch Lock, LH
631-04133
Styles E & F
To order replacement parts, contact
Illustrated Parts List
or visit
Page
Page
MANUFACTURER’S LIMITED WARRANTY FOR
��
��
�
��
��
��
��