Contents
OPERATOR’S MANUAL
Two-Stage Snow Thrower - E, F Style
MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO
Warranty
Table of Contents
Finding and Recording Model Number
Customer Support
Your Responsibility
Safety Labels
Restrict the use
in this manual and on the machine
in this manual and on the machine
Safe Operation
Practices
TrainingPreparation
Restrict the use
Maintenance & Storage
Safe Operation Practices
Operation
3. Position the chute assembly over the base
Setting Up Your Snow Thrower
Skid Shoes
Setting Up Your Snow Thrower
Adjustments
Auger Control
Know Your Snow Thrower
Operating
Your Snow
Thrower
This handle is used to manually start the engine
Operating Your Snow Thrower
When engaged, the augers rotate and draw snow into the auger housing
Crank clockwise to discharge to the left
Electric Starter
Gas & Oil Fill-Up
Stopping The Engine
If your home’s
Recoil Starter
Chute Clean-Out Tool
To Engage Drive
To Engage Augers
Making Adjustments
To adjust the skid shoes
Making Adjustments
Wheels
Maintaining Your Snow Thrower
Engine
Gear Shaft
proceed as follows
Auger Belt Replacement
replacement auger belt
Maintaining Your Snow Thrower
3. a. Grasp the idler pulley and pivot it toward the right
Maintaining Your Snow Thrower
Maintaining Your Snow Thrower
Friction Wheel Removal
Reassemble the side plates with a new rubber ring
Off-Season Storage
Preparing Engine
Preparing Snow Thrower
Remedy
Trouble Shooting
Problem
Cause
Styles E & F
Illustrated Parts List
To order replacement parts, contact
or visit
Styles E & F
631-04133
Illustrated Parts List
Handle Assembly, Clutch Lock, LH
Handle Assembly, Clutch Lock, RH
Styles E & F
Illustrated Parts List
To order replacement parts, contact
or visit
Page
Page
MANUFACTURER’S LIMITED WARRANTY FOR