5

Maintaining

Your Snow

Thrower

WARNING

Before lubricating, repairing, or inspect- ing, disengage all controls and stop engine. Wait until all moving parts have come to a complete stop.

Engine

Refer to the separate Tecumseh Engines manual packed with your unit for all engine maintenance.

Lubrication

Engine

Refer to the separate Tecumseh Engines manual packed with your unit for all engine lubrication instruc- tions.

Gear Shaft

The gear (hex) shaft should be lubricated at least once a season or after every 25 hours of operation.

1.Remove the lower frame cover by removing the two screws which secure it.

2.Apply a light coating of an all-weather multi-purpose grease to the hex shaft. See Figure 8.

Wheels

At least once a season, remove both wheels. Clean and coat the axles with a multipurpose automotive grease before reinstalling wheels.

Chute Directional Control

Once a season, the joystick should be lubricated with petroleum jelly, linseed oil, mineral oil, paraffin wax or 3-in-1 oil.

Auger Shaft

At least once a season, remove the shear pins on auger shaft. Spray lubricant inside shaft, around the spacers. Also lubricate the flange bearings found at either end of the shaft. See Figure 9.

Gear Case

The auger gear case has been filled with grease at the factory. If disassembled for any reason, lubricate with two ounces of grease (Part Number 737-0168).

NOTE: Do not overfill the gear case. Damage to the seals could result. Be sure the vent plug is free of grease in order to relieve pressure.

Figure 8

��������� ������� �������

Figure 9

Avoid oil spillage on rubber friction wheel and aluminum drive plate.

Do not overfill the gear case. Damage to the seals could result.

Shave Plate and Skid Shoes

The shave plate and skid shoes on the bottom of the snow thrower are subject to wear. They should be checked periodically and replaced when necessary. To remove skid shoes:

1.Remove the four carriage bolts and hex flange nuts which secure them to the snow thrower.

2.Reassemble new skid shoes with the four carriage bolts (two on each side) and hex flange nuts. Refer to Figure 10.

To remove shave plate:

1.Remove the carriage bolts and hex nuts which attach it to the snow thrower housing.

2.Reassemble new shave plate, making sure heads of carriage bolts are to the inside of housing. Tighten securely.

�����������������������������������

Figure 10

14

Page 13 Page 15
Page 14
Image 14
MTD 769-01275C warranty Maintaining Your Snow Thrower, Engine, Lubrication, Shave Plate and Skid Shoes
Page 13 Page 15

769-01275C specifications

The MTD 769-01275C is a versatile lawn mower designed for both efficiency and ease of use. It is particularly favored by homeowners who take pride in maintaining their lawns and gardens. This model combines several advanced technologies, making it a reliable choice for many landscaping tasks.

One of the standout features of the MTD 769-01275C is its powerful engine. Powered by a robust 382cc engine, this mower delivers ample power to tackle various grass conditions, allowing it to operate effectively even in tougher terrains. The engine is designed with efficiency in mind, ensuring that users experience reduced fuel consumption without sacrificing performance.

Another key characteristic of the MTD 769-01275C is its cutting deck. The mower typically features a 30-inch steel cutting deck, which provides a wide cutting path, enabling users to mow their lawns quickly and efficiently. The steel construction ensures durability, while the design of the deck allows for exceptional maneuverability in tight spaces, making it suitable for smaller yards and intricate landscaping.

In terms of cutting height adjustments, the MTD 769-01275C offers various settings that let users customize their mowing height. This versatility ensures that different grass types can be managed effectively, promoting healthy growth while allowing gardeners to achieve their desired lawn aesthetics.

The mower is also equipped with user-friendly technologies. One notable feature is its easy-to-use electric start system, which eliminates the hassle of manual pull starts. This is particularly beneficial for those who may have difficulty with traditional starting methods. Additionally, the mower features a comfortable operator's seat and control layout, enhancing the overall user experience and reducing fatigue during prolonged use.

Another important aspect is its maintenance features. The MTD 769-01275C is designed with accessibility in mind, making routine maintenance tasks such as oil changes and blade replacements simpler for the user. This promotes longevity and reliability, ensuring that the mower remains in good working condition for years.

In summary, the MTD 769-01275C stands out as an efficient and user-friendly lawn mower. Its powerful engine, durable cutting deck, customizable cutting heights, and user-centric technologies make it a solid choice for homeowners who demand quality in their lawn care products. With proper maintenance, this mower can deliver consistent performance, helping users achieve beautifully manicured lawns season after season.
Top Page Image Contents