5
Maintaining
Your
Chipper
Shredder
Vacuum
Figure
Front Support Brace and Lock Nut
Pivot Arm Assembly
Bell Washer
Thrust Washer
Shoulder Screw
Wave
Washer
Lock Nut | Wheel |
|
Figure
Figure
SHARPENING OR REPLACING CHIPPER BLADE
NOTE: When tipping the unit, empty the oil and fuel tank and keep engine spark plug side up.
1.Disconnect and ground the spark plug wire to retaining post.
2.Remove bag assembly or blower chute (if equipped).
3.Remove the three hex cap screws holding the chipper chute to the upper housing. See Figure
4.Remove the flange lock nuts, front wheels, and wave washers that attach to the pivot arm assemblies. See Figure
5.Remove the shoulder screws, thrust washers, and bell washers that go through the pivot arms to the front support brace. The front support brace and lock nut can be removed at this time as well.
6.Remove the three screws on the upper housing that secure the nozzle cover. See Figure
16