Chapter 2 - Installation

13.Add your second NDISWAN ISDN device by clicking Add and selecting ISDN-2- IINWANNT from the list box. Click OK to add this device to the RAS Setup as shown in figure 2-8.

Figure 2-8. Remote Access Services (RAS) Setup

14.Select the ISDN1 and click Configure to setup Port Usage for this ISDN1port. Depending upon your use of this channel, select Dial out only, Receive calls only, or Dial out and Receive calls. Click OK.

Figure 2-9. Configure Port Usage Installation

15.If you choose Dial out only, click OK, and then click the Network tab. Select the protocol you will use. If you are going to access the Internet, choose TCP/IP.

Figure 2-10. Configure Dial Out Protocol

16.If you Select Receive calls, or Dial out and Receive calls, click OK, then click the Network

MT128ISA/PCI

19