Manuals / Brands / Computer Equipment / Network Router / Multi-Tech Systems / Computer Equipment / Network Router

Multi-Tech Systems MT5600BA-V.90, MT5600BA-V.92, MT5600BL-V.90 Caller ID Options

1 66

Download 66 pages, 715.54 Kb

Chapter 3 - Using the Front Panel

Caller ID Options

Press the Æ and Enter buttons to enable formatted (FCID) or unformatted (UCID) Caller ID, or to disable Caller ID altogether. Same as the #CID=0, #CID=1, and #CID=2 commands.

Note: Because Caller ID information is sent between the first and second ring, register S0 must be set to 2 or more rings for the modem to receive Caller ID information.

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)	28

Contents

Data/Fax Modem User Guide Page MultiModemII User Guide Table of Contents Page Chapter 1 - Description and Features Product Description About AT Commands Features Safety Warnings Chapter 2 - Installation Step 1 - Connect the Modem to Your System Connect the Modem to Your PC Connect the Modem to the Telephone Line (Dialup Connection) Connect theTwo-WireLeased Line Connect the Four-WireLeased Line Connect the Phone to the Modem (Optional) Connect the Modem to the AC Power Outlet Power-OnTest Step 2 - Install the Modem Driver Installing the Modem Driver for Windows 98/Me/2000 Installing the Modem Driver for Windows NT Removing an Old Modem Driver Step 3 - Setting Your Country or Region Code (MT5600BA–V.92Only) Using the LCD Panel Using the Global Wizard Using AT Commands Step 4 - Install PhoneTools Chapter 3 - Using the Front Panel Modem Configuration LED Indicators Liquid Crystal Display (LCD) Option Selection Menu Structure Menu Overview Status Trunk Basic Options Trunk Basic Options Trunk, continued Advanced Options Trunk Advanced Options Trunk, continued Remote Configuration Options Trunk Diagnostic Options Trunk Phone Number Memory Options Trunk Caller ID Options Trunk Menu Options Status Basic Options Page Advanced Options Page Remote Configuration Options Diagnostic Options Phone Number Memory Options Caller ID Options Chapter 4 - Leased Line Operation Two-WireSetup Four-WireSetup Dial Backup and Leased-LineRestoral Page Chapter 5 - Remote Configuration Basic Procedure Changing the Remote Configuration Password Changing the Remote Escape Character Chapter 6 - Callback Security Setup Procedures Turning Callback Security On and Off Front Panel Method Assigning Callback Passwords AT Command Method Assigning Callback Phone Numbers Calling Procedure Callback Security Commands Callback Assignments Form Chapter 7 - Troubleshooting The Modem Does Not Respond to Commands The Modem Cannot Connect When Dialing The Modem Disconnects While Online The Modem Cannot Connect When Answering File Transfer Is Slower Than It Should Be Data Is Being Lost There Are Garbage Characters on the Monitor The Modem Doesn’t Work with Caller ID Fax and Data Software Can’t Run at the Same Time Appendix A - Regulatory Compliance FCC Part 68 Telecom Fax Branding Statement Canadian Limitations Notice EMC, Safety, and R&TTE Directive Compliance International Modem Restrictions New Zealand Telecom Warning Notice South African Notice Appendix B - Technical Specifications Page Appendix C - Warranty, Service, and Technical Support Multi-TechSystems, Inc. Warranty & Repairs Policies Online Warranty Registration Service Replacement Parts Technical Support Internet Sites Appendix D - Upgrading the Firmware Upgrade Overview Step 1 - Identify the Modem Firmware Step 2 - Identify the Current Firmware Version Step 3 - Download the Upgrade File Step 4 - Extract the Upgrade Files Step 5 - Clear Your Stored Paramenters Step 6 - Upgrade the Modem’s Firmware Step 7 - Restore Your Parameters Appendix E - Installing a Modem Under Linux Standard Linux Serial Port Definitions Installation Page Appendix F - Pin Descriptions RS-232Pin Descriptions RS-232Cable Pinouts Leased Line Pinouts Index