RASFinder User Guide
MTASR3-200
16
Introduction
This chapter is organized in the way you will unpack and cable your RASFinder. The unpacking
section describes the contents of the shipping box and shows how the RASFinder is packaged. The
installation procedure describes each cable connection and shows where that cable is connected to
the RASFinder. If additional RAM is needed on your RASFinder, a detailed procedure is provided
describing how to install a second SIMM.
Unpacking
The shipping box contains the RASFinder, external power supply, a plastic bag containing cables,
your Quick Start Guide, and two diskettes (i.e., the RASFinder 200-Series User Guide, and the
MultiRouter Software). Inspect the contents for signs of any shipping damage. If damage is
observed, do not power up the unit; contact Multi-Tech’s T echnical Support for advice (refer to
Chapter 7). If no damage is observed, place the RASFinder in its final location and perform the
Installation Procedure in Table 2-1.
Save the shipping box in case reshipment is necessary.
Quick Start Guide
MultiExpress