Multi-Tech Systems RF802EW quick start RouteFinder Quick Start Guide

RouteFinder Quick Start Guide

11.The Asynchronous Port Function dialog box displays. Select Remote Access, IP Routing (NAT Enabled) or IP Routing (NAT Disabled).

•Select Remote Access to allow remote users to dial-in to the network to access resources as if the remote user is connected to the network locally. Continue with the Remote Access instructions on page 17.

•Select IP Routing (NAT Enabled) to allow all users in the two IP segments (LAN and WAN Ethernet) to share one IP address to the Internet. You may also select this option to use the async port for dial-up backup in the event the DSL or cable becomes unavailable.

Note: The IP Routing (NAT Enabled) feature of the async port is valid only if the WAN port is configured as NAT Disabled.

•Select IP Routing (NAT Disabled) to connect other IP segments through the async port. Proceed to the IP Routing instructions.

Click Next.

14