Chapter 3 – Using the Web Management Software

PPP > Wakeup-On-Call Examples

Example 1 – Set Up the Ethernet Router to Activate on Incoming SMS Message

Note: You must have firmware version 1.14 or above in order for Wakeup-on-Callto work.

1.On the PPP > PPP Configuration screen, set up the following parameters:

PPP General

•Make sure that PPP is Enabled (the default).

•Make sure Dial-on-Demandis Enabled (the default).

•Set the Idle Time Out to the number of seconds you desire.

Authentication

•Your wireless service provider may require you to have a separate PPP User name and Password. If so, enter them here. Note: If a user name and password are required, your wireless provider would have given them to you when you activated your account.

Modem Configuration

•Make sure your Dial Number is entered correctly: For CDMA, it is #777

For GPRS and EDGE, it is *99***1#

•Make sure your Init String 1 is set up correctly.

For GPRS and EDGE, Init string 1 should be the APN.

Example: AT+CGDCONT=1,"IP","internet"

Submit

•Click the Submit button to save the changes made on this screen.

2.On the PPP > Wakeup-on-Callscreen, set up the following parameters:

Wakeup-on-Call Configuration

•Select Enable for Wakeup-on-Call.

•Set the Time Delay. You can use the 10 second default.

•Enter the Init Strings:

For the EDGE modem:

Enter Wakeup Init String 1 as at+cmgf=1

Enter Wakeup Init String 2 as at+csms=1

Enter Wakeup Init String 3 as at+cnmi=2,2,0,0,1

For the GPRS modem:

Enter Wakeup Init String 1 as at+cmgf=1

Enter Wakeup Init String 2 as at+csms=1

Enter Wakeup Init String 3 as at+cnmi=2,2,0,0,0

For the CDMA modem:

Enter Wakeup Init String 1 as at+cnmi=2,2,0,0,0

•Click the Submit button to save these settings.

Caller ID Configuration

•Enter a caller’s ID that you want added to the Caller ID list.

Note: Add the SMS message string into the Caller ID list. When the string configured matches the SMS message string, it will activate the Wakeup-on-Call feature.

•Add Button

Click the Add button to save each Caller ID as it is entered to the Caller ID list.

Caller Acknowledgement Configuration

•Enter a configured string that will be sent to the modem upon receiving a valid Caller ID from the WAN.

For the CDMA, GPRS, and EDGE modems:

Set the Wakeup Acknowledgement string configuration with the command at+cnma

•Click the Submit button to save the Acknowledgement Configuration.

3.Save and Restart

You must click Save and Restart once you have completed and submitted all the screens on which you have made changes. The device will save all the settings and reboot the PC.

Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375B)

33

Page 32 Page 34
Page 33
Image 33
Multi-Tech Systems RJ-45, RJ-9 manual PPP Wakeup-On-Call Examples
Page 32 Page 34

RJ-9, RJ-45 specifications

Multi-Tech Systems offers a range of communication solutions, prominently featuring the RJ-45 and RJ-9 connectors that are crucial in networking and telecommunications. These connectors are foundational to many applications, enabling efficient data transfer and ensuring reliable voice communications.

The RJ-45 connector is primarily used in Ethernet networks. It features eight pins and is designed for high-speed data transmission, making it the standard for wired local area networks (LANs). This connector supports various Ethernet standards including Fast Ethernet (100BASE-T), Gigabit Ethernet (1000BASE-T), and even 10 Gigabit Ethernet (10GBASE-T). An essential characteristic of the RJ-45 is its versatility, as it can be used with both straight-through and crossover cable configurations. This flexibility allows for straightforward connectivity between devices such as computers, routers, and switches.

Multi-Tech Systems employs advanced technology in their RJ-45 connectors, including support for Power over Ethernet (PoE). This innovation permits electrical power and data to be transmitted over the same cable, simplifying installations and reducing the need for additional wiring. The robust design of these connectors ensures durability and minimizes signal interference, thereby maximizing data integrity during transmission.

On the other hand, the RJ-9 connector, also known as the RJ-9 or RJ-10 connector, is typically used in telephone and headset applications. Characterized by its smaller size and four or six pins, the RJ-9 is optimized for voice frequency communication. It connects devices such as telephones, headsets, and other VoIP equipment, delivering clear audio quality that is essential for effective communication.

One standout feature of the RJ-9 connector is its ability to provide superior noise resistance, making it ideal for environments with significant electromagnetic interference. Multi-Tech Systems' RJ-9 connectors are designed for ease of use, allowing quick and simple connections. These connectors can often be found in various telephony devices, ensuring that they remain a staple in personal, commercial, and industrial communication systems.

In conclusion, Multi-Tech Systems continues to lead in the provision of reliable RJ-45 and RJ-9 connectors, integrating innovative technologies that enhance performance in data and voice communication. Whether in a high-speed networking environment or in everyday telephony applications, these connectors deliver the functionality and quality demanded by modern users. Their design and engineering reflect a commitment to excellence, helping users stay connected in an increasingly digital world.
Top Page Image Contents