Chapter 3 – Using the Web Management Software

Example 2 – Determine if the Wireless Modem Is Supporting Incoming Calls and Caller ID

1.On the PPP > PPP Configuration screen, make sure that PPP is Disabled.

2.On the PPP > Wakeup-on-Call screen, make sure that Wakeup-on-Call is Disabled.

3.Open a command prompt by clicking the Start button and selecting Run.

4.Type CMD to open the command window. Click OK.

5.When the command window opens, type Telnet 192.168.2.1 5000 Note: 5000 is the port number.

5.1.Enter your user name and password to login.

5.2.Enter an AT command to make sure you receive a response; i.e., OK.

5.3.Enter the Command AT+CNUM to determine the dial number of your wireless modem. Note: For a CDMA modem, you might have to enter the command AT+CICB=0

6.From another phone, call your modem using the number identified in Step 5.3. This will let you know if the RING message shows.

7.To enable Caller ID, enter the AT+CLIP=1 command on the command screen and make the call again to see if it shows Caller ID information.

Notes:

•Step 5.3 must show the RING or CALLER ID information in order for the Wakeup-on-Call function to work.

•Some wireless providers might not provide caller ID information if you have only a data plan.

Example 3 – Set Up the Ethernet Router to Activate on ALL Incoming Calls

1.On the PPP >PPP Configuration screen, set up the following parameters:

PPP General

•Make sure that PPP is Enabled (the default).

•Make sure Dial-on-Demandis Enabled (the default).

•Set the Idle Time Out to the number of seconds you desire.

Authentication

•Your wireless service provider may require you to have a separate PPP User name and Password. If so, enter them here. Note: If a user name and password are required, your wireless provider would have given them to you when you activated your account.

Modem Configuration

•Make sure your Dial Number is entered correctly: For CDMA, it is #777

For GPRS and EDGE, it is *99***1#

•Make sure your Init String 1 is setup correctly.

For GPRS and EDGE, Init string 1 should be the APN.

Example: AT+CGDCONT=1,"IP","internet"

Submit

•Click the Submit button to save the changes made on this screen.

2.On the PPP > Wakeup-on-Callscreen, set up the following parameters:

Wakeup-on-Call Configuration

•Select Enable for Wakeup-on-Call.

•Set the Time Delay to 3 seconds. You can use the 10 second default.

•All Init Strings should be empty.

•Submit Button

Click the Submit button to save these settings.

Caller ID Configuration

•Enter the string RING to the Caller ID list.

•Click the Add Button to save the string to the Caller ID list.

3.Save and Restart

Click Save and Restart once you have completed and submitted all the screens on which you have made changes. The device will save all the settings and reboot the PC.

Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375B)

34

Page 33 Page 35
Page 34
Image 34
Multi-Tech Systems RJ-9, RJ-45 manual For Gprs and EDGE, it is *99***1#
Page 33 Page 35

RJ-9, RJ-45 specifications

Multi-Tech Systems offers a range of communication solutions, prominently featuring the RJ-45 and RJ-9 connectors that are crucial in networking and telecommunications. These connectors are foundational to many applications, enabling efficient data transfer and ensuring reliable voice communications.

The RJ-45 connector is primarily used in Ethernet networks. It features eight pins and is designed for high-speed data transmission, making it the standard for wired local area networks (LANs). This connector supports various Ethernet standards including Fast Ethernet (100BASE-T), Gigabit Ethernet (1000BASE-T), and even 10 Gigabit Ethernet (10GBASE-T). An essential characteristic of the RJ-45 is its versatility, as it can be used with both straight-through and crossover cable configurations. This flexibility allows for straightforward connectivity between devices such as computers, routers, and switches.

Multi-Tech Systems employs advanced technology in their RJ-45 connectors, including support for Power over Ethernet (PoE). This innovation permits electrical power and data to be transmitted over the same cable, simplifying installations and reducing the need for additional wiring. The robust design of these connectors ensures durability and minimizes signal interference, thereby maximizing data integrity during transmission.

On the other hand, the RJ-9 connector, also known as the RJ-9 or RJ-10 connector, is typically used in telephone and headset applications. Characterized by its smaller size and four or six pins, the RJ-9 is optimized for voice frequency communication. It connects devices such as telephones, headsets, and other VoIP equipment, delivering clear audio quality that is essential for effective communication.

One standout feature of the RJ-9 connector is its ability to provide superior noise resistance, making it ideal for environments with significant electromagnetic interference. Multi-Tech Systems' RJ-9 connectors are designed for ease of use, allowing quick and simple connections. These connectors can often be found in various telephony devices, ensuring that they remain a staple in personal, commercial, and industrial communication systems.

In conclusion, Multi-Tech Systems continues to lead in the provision of reliable RJ-45 and RJ-9 connectors, integrating innovative technologies that enhance performance in data and voice communication. Whether in a high-speed networking environment or in everyday telephony applications, these connectors deliver the functionality and quality demanded by modern users. Their design and engineering reflect a commitment to excellence, helping users stay connected in an increasingly digital world.
Top Page Image Contents