Multiquip manual AR13D RIDE-ON Roller Inspection

AR13D RIDE-ON ROLLER — INSPECTION

Battery Check

A 12-volt DC battery (Figure 16) is shipped dry, and will require a proper electrolyte level for operation.

ALWAYS be sure that the battery cables are properly connected to the battery terminals as shown below. Generally the RED cable will be connected to the positive terminal of the battery, and the BLACK cable will be connected to the negative terminal of the battery.

Figure 14. Hydraulic Oil Reservoir Filler Port

Water Tank Check

1.To check the water tank water level, place the roller on secure level ground.

2.The amount of water inside the water tank can be visually inspected by reading the water tube (Figure 15) that runs verticallyalongthewatertankattherearoftheroller.Thistube indicatestheamountofwaterinsidethewatertank.Totaltank capacity is 40 gallons (152 liters)

Figure 16. Battery

WARNING - Battery Polarity Safety

If the battery cables are connected incorrectly, electrical damage will occur causing damage to the roller's electrical circuits. Pay close attention to the polarity of the battery when connecting the battery.

WATER

TANK

CAP

WATER

TANK

REAR

ROLLER

WATER

LEVEL

TUBE

Figure 15. Water Tank

PAGE 24 — AR13D RIDE-ON TANDEM DRUM ROLLER — OPERATION & PARTS MANUAL — REV. #2 (09/15/11)