Multiquip DCA-36SPX operation manual Connecting Loads, Over Current Relay

DCA-36SPX — OUTPUT TERMINAL PANEL FAMILIARIZATION

Connecting Loads

Loads can be connected to the generator by the Ouput Terminal Lugs or the convenience receptacles (Figure 13). Make sure to read the operation manual before attempting to connect a load to the generator.

To protect the output terminals from overload, a 3-pole, 150A main circuit breaker is provided. Make sure to switch ALL circuit breakers to the OFF position prior to starting the engine.

CS-6369

TWIST-LOCK

RECEPTACLES

LOAD

Over Current Relay

An over current relay (Figure 14) is connected to the main circuit breaker. In the event of an overload, both the circuit breaker and the over current relay may trip. If the circuit breaker can not be reset, the reset button on the over cur- rent relay must be pressed. The over current relay is lo- cated in the control box.

Figure 14. Over Current Relay

GFCI

RECEPTACLES

LOAD

AC OUTPUT

TERMINALS

U

O

V

GROUND

LOAD

NEUTRAL

Figure 13. Connecting Loads

PAGE 28 — DCA-36SPX— OPERATION AND PARTS MANUAL — REV. #1 (04/14/10)