TRAILER MAINTENANCE
Lug Nut Torque Requirements
It is extremely important to apply and maintain proper wheel mounting torque on the trailer. Be sure to use only the fasteners matched to the cone angle of the wheel. Proper procedure for attachment of the wheels is as follows:
1.Start all wheel lug nuts by hand.
2.Torque all lug nuts in sequence (see Figure 60). DO NOT torque the wheel lug nuts all the way down. Tighten each lug nut in 3 separate passes as defi ned by Table 16.
3.After fi rst road use, retorque all lug nuts in sequence. Check all wheel lug nuts periodically.
Table 16. Tire Torque Requirements
Wheel Size | First Pass | Second Pass | Third Pass | |
| ||||
|
|
|
| |
12" | ||||
|
|
|
| |
13" | ||||
|
|
|
| |
14" | ||||
|
|
|
| |
15" | ||||
|
|
|
| |
16" | ||||
|
|
|
|
Figure 60. Wheel Lug Nuts
Tightening Sequence
NOTICE
NEVER use an pneumatic air gun to tighten wheel lug nuts.
PAGE 44 — DCA125SSIU 50 HZ GENERATOR • OPERATION AND PARTS MANUAL — REV. #0 (12/22/08)
