FS2/FS2SP CONCRETE SAW — SAFETY MESSAGE ALERT SYMBOLS

Accidental Starting

ALWAYS place the ON/OFF switch in the OFF position, remove key and/or disconnect the spark plug lead before servicing the engine or equipment. Ground the lead to prevent sparks that could ignite a fire.

Respiratory Hazard

ALWAYS wear approved respiratory protection.

Over Speed Conditions

NEVER tamper with the factory settings of the engine governor or settings. Personal injury and damage to the engine or equipment can result if operating in speed ranges above maximum allowable.

Sight and Hearing hazard

ALWAYS wear approved eye and hearing protection.

Guards and Covers In Place

Equipment Damage Messages

NEVER operate the saw without blade guards and covers in place. Adhere to safety guidelines ANSI American National Standards Institute, OSHA or other applicable local regulations.

Other important messages are provided throughout this manual to help prevent damage to your concrete saw, other property, or the surrounding environment.

NOTE

This concrete saw, other property, or the surrounding environment could be damaged if you do not follow instructions.

MQ-WHITEMAN FS2/FS2SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #2 (06/26/06) — PAGE 7

Page 6 Page 8
Page 7
Image 7
Multiquip FS2/FS2SP Concrete SAW Safety Message Alert Symbols, Always wear approved respiratory protection
Page 6 Page 8
Top Page Image Contents