setup
1.Set the GBC/GBCE cart on a firm level surface where there is enough space around the cart for the outriggers to be deployed.
2.Insert the
HANDLE
HOLDER
WASHER WING
BOLT
Figure 4.
3.Insert the mast into the mast holder and secure with lever as shown in Figure 5.
MAST
HOLDER
LEVER
Figure 5. Inserting the Mast Into Holder
4.For the GBCE, attach the extension pole to the top of the mast as shown in Figure 6.
EXTENSION
POLE
BOLT
Figure 6. Extension Pole Attachment
5.Insert the balloon assembly into the mast. Tighten the
BALLOON
PROTECTIVE
COVER
MAST
Figure 7. Installing the Balloon
6.Unsnap the three buttons on the bottom of the balloon cover and unzip the cover. See Figure 8.
7.Remove the AC Power Cable from the inside pocket
of the balloon cover.
AC POWER
CABLE
ZIPPER
BUTTON
Figure 8. Removal of AC Power Cable from
Balloon Cover
8.Fold the balloon cover into itself and zip it up. See Figure 9.
FOLD PROTECTIVE
COVER INTO ITSELF
ZIPPER
BALLOON
FULLY
EXPOSED
Figure 9. Folding Balloon Cover
page 16 — GBC/GBCE lighting system • operation and parts manual — rev. #1 (03/25/14)