operation
STOWING OUTRIGGER
1. Pull up the counterweight to unlock the outrigger and pull up outrigger. See Figure 17.
PULL UP
COUNTERWEIGHT
PULL UP
OUTRIGGER
Figure 17. Stowing Outrigger
2.Push in outrigger until it is all the way in and pull down counterweight to lock it in place. See Figure 18.
PUSH IN
OUTRIGGER
PUSH IN
OUTRIGGER
Figure 18. Locking Stowed Outrigger
raising the mast
DANGER
ALWAYS make sure the area above the lighting system is open and clear of overhead power lines and other obstructions. Contact with overhead power lines or other obstructions could result in equipment damage, electrical
shock, electrocution and even death.
CAUTION
When raising or lowering the mast, keep hands and fingers clear of the mast sections to prevent hand and fingers from getting pinched.
1.Raise the second mast to the desired height and tighten the
SECOND
MAST
Figure 19. Raising the Second Mast
2.To raise the mast higher, raise the third mast until the lock/release tab pops out. The tab will automatically rest on the second mast. See Figure 20.
THIRD
MAST LOCK/
RELEASE
TAB
Figure 20. Raising the Third Mast
gbc/GBCE lighting system • operation and parts manual — rev. #1 (03/25/14) — page 19
