maintenance
NOTICE
Do not use excessive force when screwing the lamp to prevent lamp from breaking.
7.Secure lamp holder on top of the lamp.
8.Reinstall lamp guard.
9.Pull down balloon and zip the bottom zipper to cover lamp.
REPLACING BALLOON
1.Unzip the top and bottom of the balloon. See Figure 31.
UNZIP TOP AND
BOTTOM ZIPPERS
BALLOON
Figure 31. Unzipping Balloon
2.Slide out the old or worn balloon over the top of the lamp guard assembly. See Figure 32.
REMOVE OLD
BALLOON
Figure 32. Removing Old Balloon
3.Slide in the new replacement balloon over the top of the lamp guard assembly. See Figure 33.
INSTALL NEW
BALLOON
Figure 33. Replacing Balloon
4.Zip up the top and bottom of the new balloon. See Figure 34.
ZIP UP
NEW BALLOON
Figure 34. Zipping Up New Balloon
gbc/GBCE lighting system • operation and parts manual — rev. #1 (03/25/14) — page 23
