GDP-5H — CONTROLS AND INDICATORS

Figure 4A. Generator Components

1.

230V Output Receptacles– These three NEMA 7410

 

twist-lock receptacles will provide 230V, 12.5 amps,

 

180 Hz.

2.

180 Hz Earth Leakage Circuit Breaker – This 3-pole

 

earth leakage circuit breaker allows the circuit to be broken

 

when the load side shorts or there is an over-current

 

condition. In addition, during operation of the generator it

 

can detect when there is defective insulation on the load

 

side and breaks the circuit in response. When starting the

 

generator always have the circuit breaker placed in the

 

"OFF" position.

3.

Lifting Bail Eye – Attach a rope or chain to this lifting eye

 

when lifting of the generator is required. Never stand

 

underneath the generator while it is being lifted. Place lifting

 

eye in down position when not in use.

4.

60 Hz Circuit Breaker – This 2-pole circuit breaker (240/

 

15 amps or 120/30 amps) protects the generator from short

 

circuiting or overloading. When starting the generator

 

always have the circuit breaker placed in the "OFF"

 

position.

5.

AC-Voltmeter – This voltmeter indicates (with a mark) the

 

rated 60 Hz (single-phase) output voltage. In addition the

voltmeter can also be used as a diagnostic tool. If the voltmeter indicator (needle) is below the rated voltage, engine problems may exist (low/high RPM's). To prevent damage to the generator or power tools turn the generator OFF and consult your authorized Multiquip service dealer. This meter cannot be used for 180 Hz applications.

6.

Idle Control Switch – This generator is provided with an

 

automatic idle control device for noise suppression and

 

reduced fuel consumption. The automatic idle control

 

automatically engages under a no-load condition. With the

 

automatic idle control switched “ON”, the engine revolutions

 

will automatically drop to about 2600 rpm (low-speed

 

operation) within 3 seconds after the load stops. When the

 

operation is resumed, the engine speed is automatically

 

increased to about 3600 rpm (high-speed operation) as

 

soon as the load is connected.

7.

Operation Switch – Place this rocker switch in the "ON"

 

position (up) for normal operation.To turn-off the generator

 

place this switch in the "OFF" position (down).

8.GFCI Duplex Receptacle – This NEMA 5-20R, GFCI receptacle will provide 120V, 20 amps.

9. Ground – This ground connection point should be connect to a good earth ground (ground rod).

10. 240V Output Receptacle – This NEMA L6-20R twist- lock receptacle will provide 240V, 15 amps, 60 Hz.

11. 120V Output Receptacle – This NEMA L5-30R twist- lock receptacle will provide 120V, 30 amps, 60 Hz.

PAGE 18 — GDP-5H A.C. GENERATOR— PARTS & OPERATION MANUAL — REV. #2 (10/05/05)

Page 17 Page 19
Page 18
Image 18
Multiquip manual GDP-5H Controls and Indicators
Page 17 Page 19

GDP-5H specifications

The Multiquip GDP-5H is a robust and versatile piece of equipment designed for various industrial applications, particularly in construction and heavy-duty operations. As part of Multiquip's lineup, the GDP-5H stands out owing to its exceptional performance, durability, and user-friendly design.

One of its main features is the powerful Honda GX160 engine, which provides reliable performance and ensures efficient operation. The engine is known for its longevity and low maintenance requirements, allowing operators to focus on their tasks without frequent interruptions. Additionally, the GDP-5H has a compact design, making it easy to transport and maneuver in tight job sites.

The GDP-5H comes equipped with a hydraulic pump that delivers high flow rates, allowing for fast and efficient operation. This is particularly advantageous when working with multiple attachments or in demanding environments where time is of the essence. The hydraulic system is engineered for maximum reliability and ease of maintenance, featuring components that are readily accessible.

In terms of versatility, the GDP-5H can be fitted with various attachments, making it suitable for a range of applications, from trenching to lifting and beyond. This adaptability not only enhances productivity but also allows companies to optimize their investment in equipment.

Safety is a priority in the design of the Multiquip GDP-5H. It features operator-friendly controls that are intuitive and easy to understand, minimizing the risk of accidents and enhancing overall operational safety. Additionally, the equipment is designed with protective measures to safeguard both the operator and the machine from potential hazards.

The GDP-5H also emphasizes convenience through its fuel efficiency and reduced emissions, meeting stringent industry standards. This is increasingly important in today's world, where environmental considerations play a critical role in equipment selection.

In summary, the Multiquip GDP-5H is a powerful, adaptable, and user-friendly machine that addresses the needs of various industrial applications. Its combination of a reliable Honda engine, efficient hydraulic system, safety features, and versatility positions it as a valuable asset for any construction or heavy-duty operation. Whether used for site preparation, material handling, or other tasks, the GDP-5H proves to be an essential tool for productivity and efficiency on the job.
Top Page Image Contents