Linksys E-Series

Back view

Product overview

Port activity indicator

Ethernet ports

Internet port

Power port

Wi-Fi Protected Setup indicator

Wi-Fi Protected Setup button

Ethernet ports—Connect Ethernet cables (also called network cables) to these Fast Ethernet (10/100) ports, color coded blue, and to wired Ethernet network devices on your network..

Internet port—Connect an Ethernet cable (also called a network or Internet cable) to this port, color coded yellow, and to your modem..

••Wi-Fi Protected Setup™ button—Press this button to easily configure wireless security on Wi-Fi Protected Setup-enabled network devices.. For more information, see “How to set up wireless security using WiFi Protected Setup” on page 43..

Power indicator—Stays on steadily while power is connected and following a successful Wi-Fi Protected Setup connection.. Flashes slowly during bootup, during firmware upgrades, and during a WiFi Protected Setup connection.. Flashes quickly when there is a WiFi Protected Setup error..

Power—Connect the included AC power adapter to this port..

Caution

Use only the adapter that came with your router..

Green network

activity indicator

Network and Internet port

Green activity indicator—On Ethernet ports, stays on when a cable connects the port to another Ethernet port.. On the Internet port, stays on while connected to a modem.. On both port types, it flashes while transferring data..

Bottom view

Reset button—Press and hold this button for 5-10 seconds (until the port lights flash at the same time) to reset the router to its factory defaults.. You can also restore the defaults using the browser-based utility.. For more information, see “How to restore factory defaults” on page 61..

2

Page 14
Image 14
Cisco Systems E1200 manual Back view, Bottom view, Port activity indicator