Pioneer PDR-W37 Marking recorded tracks to skip, O2 Skip SET?, Skip indicator starts to blink

4¢￿

7

SKIP ID

SET CLEAR

6 Finalizing and Erasing

COMPACT DISC RECORDER / MULTI-CD CHANGER	×óBÀö²³￿
￿
	OPEN/CLOSE
3-COMPACT DISC MULTI CHANGER	0
	COMPACT DISC DIGITAL RECORDER

CD-R CONTROL ¦￿ REC VOL

41 Á¢￿

6	7
	PUSH ENTER

CD TEXT Hi-bitLegatoLinkConversion

Marking recorded tracks to skip

Although you can’t erase tracks on a CD-R disc, you can set what are called ‘skip IDs’. These tell a CD player (though many do not recognize skip IDs) not to play a particular track, but to skip to the next one on the disc.

You can also set skip IDs on CD-RWs, although it's probably a less useful feature since you can always erase the last track.

Once a skip ID is set, you can clear it, but be careful: you can set up to 21 skip IDs per disc, but repeatedly setting and clearing skip IDs in different recording sessions will reduce this number.

Note: Once a disc has been finalized, you can’t set or clear skip IDs. However, CD-RWs can be un-finalized, so you can always go back and change those you have set (see p.32 for more on this).

Setting skip IDs:

1Play the track you want to to skip.

2Press SKIP SET.

The SKIP indicator starts to blink.

O2 SKIP SET?

SKIP

•If the track you selected in step 1 above already had a skip ID set, playback jumps to the next track that doesn’t have a skip ID set.

•Use the 4and ¢buttons (or JOG dial on the front panel) if you want to change the track again here.

•If there's no room left on the disc to record another skip ID, the display will show the message SKIP FULL.

3Press SKIP SET again to set the skip

ID for the track playing.

The SKIP indicator lights in the display once a skip ID has been set.

• To cancel, press 6(or SKIP CLEAR).

4Set further skip IDs by repeating steps 1 to 3.

5When you're finished, press 7 to stop

the disc and press 0 (CD-R side).

Until you eject the disc, the recorder stores the skip ID information in its memory. On pressing 0, the recorder writes the skip ID information onto the disc.

Be careful: don’t switch off the unit before ejecting the disc—you’ll lose this sessions skip ID changes!

33