Pioneer PDR-W37 manual Playback Functions, Clearing the playlist, CDÐ Trkpgm ÐÐ

7 Playback Functions

		A B C	D E F
	1	2	3
	G H I	J K L	M N O
	4	5	6	￿	×óBÀö²³￿
				COMPACT DISC RECORDER / MULTI-CD CHANGER
	P Q R S T U V W X Y Z
	7	8	9	3-COMPACT DISC MULTI CHANGER	COMPACT DISC DIGITAL RECORDER
PLAY	MARK
MODE

10/0 >10

4 ¢￿

3

		PLAY MODE
6	7	6	7
7

DISC 1 DISC 2 DISC 3

CD TEXT Hi-bitLegatoLinkConversion

PROGRAM CHECK CLEAR

Programming a playlist (3-CD changer)

Programming a playlist means telling the player precisely which tracks, and in what order, you want played. You can program a sequence of up to 30 tracks, playing tracks from any of the discs loaded in the changer, and playing tracks more than once if you like.

1With all discs stopped(with CD 1, 2,

or 3 in the display), press PROGRAM.

The PGM indicator lights and the display prompts you to enter the first disc/track in the playlist:

CDÐ TRKPGM ÐÐ

2Enter the disc/track numbers in the

order you want them played.

Use the DISC buttons to select the disc.

Use the number buttons to select tracks:

•For track numbers 1 to 10, use the corresponding number button.

•For track numbers over 10, press the >10 button, then enter the track number. For example, to select track 20 press

>10, 2, then 10/0.

•You can also use the 4and ¢buttons to select tracks, pressing PROGRAM after each to enter it into the playlist.

After adding a track to the playlist, the display shows the disc and track number and the total playing time of the playlist:

TRK	MINSEC
CD2 O1	O8:39

Note: The display will not show the total playing time of playlists that exceed 100 minutes.

3Press 3 (6 on the front panel) to start playback.

Clearing the playlist

Clear the playlist by either:

•pressing 7while the disc is stopped.

•pressing PLAY MODE.

•ejecting a disc in the changer (or the CD-R disc tray to clear a CD-R playlist).

Clearing a track from the playlist

With playback stopped, delete the last (most recently) programmed track by pressing CLEAR. Press repeatedly to clear several steps.

Checking what's in the playlist

When the disc is stopped you can check the contents of the playlist using the CHECK button. Each press steps through the playlist, showing the step number and the corresponding disc and track number.

Adding a track to the playlist

During playback, you can add the track currently playing to the playlist by pressing PROGRAM twice. If there is currently no playlist, then one is created.

35