Pioneer PDR-W37 manual To record, 10/0

5 Recording Features

	A B C	D E F
1	2	3
G H I	J K L	M N O
4	5	6
P Q R S T U V W X Y Z
7	8	9	OPEN/CLOSE
MARK			1	0
10/0	>10
4		¢￿	2	0

3 0

COMPACT DISC RECORDER / MULTI-CD CHANGER

￿×óBÀö²³￿

3-COMPACT DISC MULTI CHANGER

		COMPACT DISC DIGITAL RECORDER
CD=CD-R
START	REC MODE	AUTO SPACE
REC THIS

OPEN/CLOSE

0

REC
THIS		7
		7
DISC 1	DISC 2	DISC 3

PROGRAM

7

CD TEXT Hi-bitLegatoLinkConversion

Recording a programmed selection

You can automate the process of making a mix CD by using the programming function of the disc changer.

1Load the CD(s) you want to program

tracks from in to the CD changer.

You can use any of the three disc trays in the changer.

2Load a CD-R or CD-RW into the

CD-R tray.

If the disc isn't blank, make sure that there is enough space on the disc for what you want to record (see Switching the Display on pages 16–18 to check this).

3Program a playlist of tracks you want

to record.

For detailed instructions on programming a playlist see Programming a playlist (3-CD changer) on page 35.

4Press REC MODE.

The display shows PROGRAM REC.

If you want to switch the copying speed, do so here. The default is 2x speed. See Changing the recording speed on page 28 to change it.

If you want to adjust the digital recording level, do so here. The default is 0dB. See Setting the recording level on page 28 to adjust it.

5If you want to automatically space the tracks on the recording, press

AUTO SPACE.

Switching on automatic spacing makes sure that there's four seconds of silence between each recorded track.

6Press CD=CD-R START (REC THIS).

Recording stops automatically after the playlist has finished.

•If the button is blinking, there’s not enough space on the disc for what you want to record. Press again to start recording anyway, or press 7to cancel.

If the playlist is longer than the recording time available on the CD-R/CD-RW, recording stops when the end of the disc is reached.

•If you want to now finalize the disc, turn to page 30.

22