Sanyo PDG-DXL2000 4

27

ENGLISH

E-mail setting

✐"When PJ lamp is off" signifies the lamp goes out without user operation. "When PJ is turned into

Standby in proper user operation" signifies that the projector is turned on by using the web browser

and then it is turned into standby with ON/STANDBY button on the top control or the remote control.

✐Up to 99,999 hours can be set for use time.

Error message for sending alert mail

When the projector has an abnormality, an

alert message will be sent to the registered

E-mail address.

If the SMTP server is missing or the authen-

tication is not completed because of input

error in E-ma il a ddres s s etti ng o r SM TP

authentication setting when sendi ng alert

e-mail, the error message will b e displayed.

Please check the respective settings.

Option

Option selection for sending alert mail

Click Option sub menu tab. Check the con-

dition items under w hich alert mail will be

sent and click Set button.

Please refer to item "Ex amples :Type and

contents of alert mail" described on the next

page.

4 Setting POP server

When "POP befo re S MTP" is sele cted at

"Auth" of "SMT P Aut hentic ation sett ing",

enter "POP server*2" and "P OP server port"

and click Set button.

*2 The POP server is a server for receiving e-mail.

Please contact your network administrator to have this POP server address.

Error information

Error information

Error message for missing SMTP server

Error message for authentication problem

Contents

Main Compliance Federal Communications Commission Notice Safety instructions Table of contents Page Features E-Mail Alert function (+p.25) Web Management function (+p.31) Required operating environment for computers Network specifications of the projector LAN Terminal Cabling Between the Projector and a Hub or computer*1 Notice Expression/Abbreviation Use of this manual Trademarks Flow of installation STEP 1 Connect the LAN and set the configuration. STEP 2 Network Configuration has completed. Page Page Network configuration Connecting to the LAN line Setting Procedure Page Network PIN code Network information Network factory default Wired LAN factory default settings Page Login the setting page of the projector [1] Enter the IP address [2] Login [3] Display of main setting page Main setting page in the display How to use the setting page Page Initial setting Network PIN code setting PJLink and password setting What's PJLink? PJLink Notice Network configuration E-mail setting 2 1 3 Error message for sending alert mail Option selection for sending alert mail 4 Chapter 3 Basic Setting and O peration When PJ lamp replacement time is reached: When PJ needs service: Error information Examples: Type and contents of alert mail When internal PJ temperature is too high: SNMP setting Page Page Power control and status check About projector condition Control Input System Page Image adjustment PC adjustment Setting up the projector Screen setting Setting 1 Setting 3 Setting 2 Information Indication of the lamp status Page Page Chapter 5 Appendix Examples of connection Peer-To-Peer connection To another network Connecting the projector (PJ01) to the control computer (PC05) directly. * STP crossover cable The gateway (Router) installed in the network Connecting the projector (PJ01) to the control computer (PC05) via the gateway. Oce Gateway (Router) To another network Use of telnet Control Page Web browser setting Active Script/JavaScript enable Proxy setting Examples: OS/Browsers Page Netscape Navigator v.7.1 JavaScript Setting MAC OS X v 10.4 Safari v.3.2.1 JavaScript enable setting 1 2 3 Q&A Installation/Access Q A Q from a remote location?