Mail setting | Sanyo PDG-DXL2000 manual

E-mail setting

E-mail setting

This projector has an E-mail function which can send an alert message to users or an administrator if it detects an abnormality on the projector or run out of the life span of the lamp. Click E-mail Setting on the main

menu and follow the below steps.

	Item		Description
	SMTP server		Enter server name or IP address of the SMTP server. (up to 60 characters)
	SMTP server port		Enter Port number of the SMTP server. (from 1 to 65535)
	Administrator address....		Enter e-mail address of administrator.
	Add address		Enter e-mail address of the user to send mail when the projector has an
			abnormality.

		SMTP Authentication setting
	Auth		Sets authentication setting option. (OFF, SMTP Auth, POP before SMTP)
	SMTP Auth		Sets user authentication setting option when selecting "SMTP Auth" in above
	User ID		column. (CRAM-MD5, LOGIN, PLAIN)
			Enter SMTP user ID. (up to 63 characters)
	Password		Enter SMTP password. (up to 63 characters)
	POP server		Enter server name or IP address of the POP server. (up to 60 characters)
	POP server port		Enter Port number of the POP server. (from 1 to 65535)
						ENGLISH

25

Image 25

Sanyo PDG-DXL2000 Mail setting, Enter Port number of the Smtp server. from 1 to, Enter e-mail address of administrator

Contents

Network Set-up and Operation Wired Setting Projector Set-up and Operation Federal Communications Commission Notice ComplianceAddress Telephone No 818998-7322 Safety instructions Table of contents Chapter Web Management function +p.31 Features Required operating environment for computers Network specifications of the projector Use of this manual Expression/AbbreviationTrademarks Connect the LAN and set the configuration Flow of installationNetwork Configuration has completed Preparation Setup Procedures Connecting to the LAN line Description Network PIN code Numerical value is a setting example Network factory default Wired LAN factory default settings Chapter Basic Setting and Operation Login Login the setting page of the projectorEnter the IP address Main setting page in the display Display of main settingSub menu tab Switches the sub menu tab Main menu Setting Example of the setting How to use the setting Select items by ticking on check boxes Select an item by selecting a radio button Initial setting PJLink and password setting Network PIN code settingTo 32 alphanumeric characters can be used for the password Whats PJLink? Displays the selected LAN mode Network configurationSets Dhcp configuration ON/OFF Enter e-mail address of administrator Mail settingEnter Smtp password. up to 63 characters Enter Port number of the Smtp server. from 1 to Setting Smtp authentication Setting Smtp server and administrator addressRegistering and deleting E-mail addresses Error message for sending alert mail Setting POP server Examples Type and contents of alert mail Enter community name to send Trap. Default name is public Snmp settingPJ information Enter user name of the projector etc. optional Trap check/delete Up to 99,999 hours can be set for the time settingClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Service in need Power control and status checkDisplays the status of the projectors power. Refer to next Popup confirmation window Status Description About projector condition Input Control Input signal are listed Input signal are listedSystem Auto is fixed at the Scart input Suppresses the sound. ON, OFF Sound Image adjustment PC adjustment Screen setting Setting up the projectorSee the next page for the description of other functions Setting Sets into the selected power manage Power OutMent mode Ready, Shutdown, OFF if Input signal is interrupted and no Items Description Information Status Indication of the lamp status Controlling the Projector Chapter Appendix Peer-To-Peer connection Examples of connectionTo another network Entrance hall Gateway Router installed in the network Control Use of telnetUse the IP address assigned to the projector Command Function Active Script/JavaScript enable Web browser settingProxy setting Windows XP Professional Examples OS/BrowsersInternet Explorer Proxy setting Netscape Navigator JavaScript Setting Safari MAC OS X v How can I restrict access from the computer Why doesn’t the setting page appear in my web browser? How can I install several projectors? Why am I not receiving E-mail alert messages? Why cant be turned on/off with web browser?Ting What are the rules for IP address assignment? What is the MAC address assigned to the projector? Can I update the firmware of the projector SO-KV8AC