Flow of installation

Flow of installation

To use the projector via the networks, follow the setup procedures below.

STEP 1 Connect the LAN and set the configuration.

Decide depending on the LAN environment.

“2. Setup Procedures” (pp.11–16).

Detailed LAN configurations need to be done with a browser later.

First, complete the Wired LAN connection between computers and projec- tors, then start browser configurations.

“3. Basic setting and operation” (pp.17–30).

STEP 2 Network Configuration has completed.

Follow each chapter to operate the projector.

Operate and manage the projector “4. Controlling the projector”(pp.31-44)

“Power Control and status check”(pp.32-33)

“Control”(pp.34-37)

“PC adjustment”(p.38)

“Setting up the projector”(p.39-41)

“Projector information”(pp.42-43)

ENGLISH



Page 9
Image 9
Sanyo PDG-DXL2000 Flow of installation, Connect the LAN and set the configuration, Network Configuration has completed