Gateway Router installed in the network | Sanyo PDG-DXL2000 specification

Examples of connection

The gateway (Router) installed in the network

Connecting the projector (PJ01) to the control computer (PC05) via the gateway.

Entrance hall

Projector Name: PJ01

IP Address	: 192.168.200.15
Subnet Mask	: 255.255.255.0
Default Gateway	: 192.168.200.1
DNS	: 192.168.201.1

Network Group: 192.168.200.x

To another network

Oce

Computer Name		: PC205
IP Address		: 192.168.200.5
Subnet Mask		: 255.255.255.0
Default Gateway		: 192.168.200.1
DNS		: 192.168.201.1

Hub

Gateway (Router) IP Address : 192.168.200.1

IP Address : 192.168.100.1

IP Address : 192.168.10.1

Hub

Hub

Computer Name: PC05

Computer Name

: PC10

Computer Name

: PC51

Computer Name

: PC61

IP Address

: 192.168.10.5

IP Address

: 192.168.10.10

IP Address

: 192.168.10.51

IP Address

: 192.168.10.61

Subnet Mask

: 255.255.255.0

Subnet Mask

: 255.255.255.0

Subnet Mask

: 255.255.255.0

Subnet Mask

: 255.255.255.0

Default Gateway

: 192.168.10.1

Default Gateway

: 192.168.10.1

Default Gateway

: 192.168.10.1

Default Gateway

: 192.168.10.1

DNS

: 192.168.201.1

DNS

: 192.168.201.1

DNS

: 192.168.201.1

DNS

: 192.168.201.1

Network Group: 192.168.10.x

ENGLISH

47

Image 47

Sanyo PDG-DXL2000 owner manual Gateway Router installed in the network, Entrance hall

Contents

Network Set-up and Operation Wired Setting Projector Set-up and Operation Telephone No 818998-7322 ComplianceFederal Communications Commission Notice Address Safety instructions Table of contents Chapter Web Management function +p.31 Features Required operating environment for computers Network specifications of the projector Trademarks Expression/AbbreviationUse of this manual Network Configuration has completed Flow of installationConnect the LAN and set the configuration Preparation Setup Procedures Connecting to the LAN line Description Network PIN code Numerical value is a setting example Network factory default Wired LAN factory default settings Chapter Basic Setting and Operation Enter the IP address Login the setting page of the projectorLogin Setting Display of main settingMain setting page in the display Sub menu tab Switches the sub menu tab Main menu Example of the setting How to use the setting Select items by ticking on check boxes Select an item by selecting a radio button Initial setting Whats PJLink? Network PIN code settingPJLink and password setting To 32 alphanumeric characters can be used for the password Sets Dhcp configuration ON/OFF Network configurationDisplays the selected LAN mode Enter Port number of the Smtp server. from 1 to Mail settingEnter e-mail address of administrator Enter Smtp password. up to 63 characters Registering and deleting E-mail addresses Setting Smtp server and administrator addressSetting Smtp authentication Error message for sending alert mail Setting POP server Examples Type and contents of alert mail Enter user name of the projector etc. optional Snmp settingEnter community name to send Trap. Default name is public PJ information Click Set button if you tick or un-tick the check box on a Up to 99,999 hours can be set for the time settingTrap check/delete Chapter Controlling the Projector Popup confirmation window Power control and status checkService in need Displays the status of the projectors power. Refer to next Status Description About projector condition Input Control Auto is fixed at the Scart input Input signal are listedInput signal are listed System Suppresses the sound. ON, OFF Sound Image adjustment PC adjustment See the next page for the description of other functions Setting up the projectorScreen setting Setting Input signal is interrupted and no Power OutSets into the selected power manage Ment mode Ready, Shutdown, OFF if Items Description Information Status Indication of the lamp status Controlling the Projector Chapter Appendix To another network Examples of connectionPeer-To-Peer connection Entrance hall Gateway Router installed in the network Use the IP address assigned to the projector Use of telnetControl Command Function Proxy setting Web browser settingActive Script/JavaScript enable Internet Explorer Examples OS/BrowsersWindows XP Professional Proxy setting Netscape Navigator JavaScript Setting Safari MAC OS X v How can I restrict access from the computer Why doesn’t the setting page appear in my web browser? How can I install several projectors? Ting Why cant be turned on/off with web browser?Why am I not receiving E-mail alert messages? What are the rules for IP address assignment? What is the MAC address assigned to the projector? Can I update the firmware of the projector SO-KV8AC