Pioneer PDR-W37 manual Finalizing and Erasing, Erase Toc, Erase All ?, Initialize ? Cd-Rw

6 Finalizing and Erasing

COMPACT DISC RECORDER / MULTI-CD CHANGER

￿×óBÀö²³￿

3-COMPACT DISC MULTI CHANGER

COMPACT DISC DIGITAL RECORDER

ERASE

¦￿ REC VOL

41 Á¢￿

6	7
	PUSH ENTER

CD TEXT Hi-bitLegatoLinkConversion

When a finalized disc is loaded:

1Press ERASE.

2Use the jog dial (or press 41 or

Á¢) to change the erase option.

Switch between:

•Erase the TOC (‘de-finalize’ the disc so that further recording is possible)

ERASE TOC	?	CD-RW
		FINALIZE

Be careful: When you erase the TOC, the CD text information for the disc is also copied to memory for editing purposes, erasing the oldest text information stored (as explained on page 30).

• Erase all tracks

ERASE ALL ?	CD-RW
	FINALIZE

• Press 7to cancel erase here.

3Press 6 (CD-R side).

The display shows the time remaining to completion.

•You can halt this erase process by holding down the 7 button for 10 seconds. Make sure, however, that you erase the disc completely at a later date since you can’t use a partially erased disc.

4Eject the disc.

You must eject, then re-insert the disc if you want to record any new tracks.

Re-initializing a disc

1Press and hold ERASE for about four

seconds.

The display indicates initialize mode.

INITIALIZE ? CD–RW

• Press 7to cancel initialize here.

2Press 6 (CD-R side).

The process takes about half the length of the disc. The display shows the time left to completion.

•You can halt this erase process by holding down the 7 button for 10 seconds. Make sure, however, that you erase the disc completely at a later date since you can’t use a partially erased disc.

3Eject the disc.

You must eject, then re-insert the disc if you want to record any new tracks.

32