Linksys E-Series

To disable the lights using the browser-based utility:

For E900 E1200 E1200V2 E1500 E2500 E3200

Status > Ports

1.Log into the browser-based utility (see “How to open the browser-based utility” on page 25)..

2.Click the Status tab, then click the Ports page..

3.In the Rear Port Lights section, click Off, then click Save Settings..

To disable the lights using the browser-based utility:

For E4200

Setup > Basic Setup

1.Log into the browser-based utility (see “How to open the browser-based utility” on page 25)..

2.Click the Setup tab, then click the Basic Setup page..

3.Set Rear Port Lights to Off, then click Save Settings at the bottom of the page..

Maintaining and Monitoring

How to test your Internet connection

What utilities are included in my router to test my Internet connection? Your router includes two diagnostic tests, Ping and Traceroute, that let you check network connections, including network devices and your Internet connection..

To diagnose your Internet connection:

Administration > Diagnostics

1.Log into the browser-based utility (see “How to open the browser-based utility” on page 25)..

2.Click the Administration tab, then click the Diagnostics page..

3.To check whether an address can be reached, enter an IP address or URL, a packet size, and number of times to ping in the Ping Test section, then click Start to Ping..

66

Page 78
Image 78
Cisco Systems E1200 manual How to test your Internet connection, To disable the lights using the browser-based utility