Cisco Systems E1200 manual Port activity indicators

Linksys E-Series

Back view

Product overview

Port activity indicators

		Power port
USB port	Internet port	Power indicator
Ethernet ports	Wi-Fi Protected Setup button

•• USB port—To easily share disk storage with other users on your network or on the Internet, connect a USB drive to this port.. For more information, see “Using an External Drive” on page 48.. You can also connect a USB printer and share it across your network.. For more information, see “How to connect a printer” on page 18..

•• Ethernet ports—Connect Ethernet cables (also called network cables) to these Gigabit (10/100/1000) ports, color coded blue, and to wired Ethernet network devices on your network..

•• Internet port—Connect an Ethernet cable (also called a network or Internet cable) to this port, color coded yellow, and to your modem..

••Wi-Fi Protected Setup™ button—Press this button to easily configure wireless security on Wi-Fi Protected Setup-enabled network devices.. For more information, see “How to set up wireless security using Wi‑Fi Protected Setup” on page 43..

•• Power indicator—Stays on steadily while power is connected and following a Wi-Fi Protected Setup connection.. Flashes slowly during bootup, during firmware upgrades, and during a Wi‑Fi Protected Setup connection.. Flashes quickly when there is a Wi‑Fi Protected Setup error..

•• Power—Connect the included AC power adapter to this port..

Caution

Use only the adapter that came with your router..

Yellow network	Green network
activity indicator	activity indicator

Network or Internet port

•• Green network activity indicator—On Ethernet ports, turns on when a cable connects the port to another Gigabit Ethernet port.. On the Internet port, turns on while connected to a modem..

•• Yellow activity indicator—Flashes to indicate network activity over that port..

Bottom view

•• Reset button—Press and hold this button for 5-10 seconds (until the port lights flash at the same time) to reset the router to its factory defaults.. You can also restore the defaults using the browser-based utility.. For more information, see “How to restore factory defaults” on page 61..

9