Linksys E-Series

To manually set your router’s wireless security settings:

Wireless > Wireless Settings (E4200)

Wireless > Wireless Security (non-E4200)

1.Log into the browser-based utility (see “How to open the browser-based utility” on page 25)..

2.Click the Wireless tab, then click the Wireless Settings page (for E4200 routers) or Basic Wireless Settings page (for non-E4200 routers)..

3.Select your preferred security type from the Security Mode drop-down list For most home networks, we recommend WPA2/WPA Mixed Mode..

4.Enter a passphrase (security key) for your wireless network in the Passphrase field.. The most secure type of security key should include a mix of uppercase and lowercase letters, numbers, and punctuation..

5.Click Save Settings at the bottom of the screen..

How to set up wireless security using WiFi Protected Setup

For ALL

Why would I use Wi-Fi Protected Setup? Wi-Fi Protected Setup™ is a feature of your router that makes it easy to add devices to your wireless network.. If you have network devices, such as wireless printers, that support Wi-Fi Protected Setup, then you can use Wi-Fi Protected Setup to add the devices..

Wi-Fi Protected Setup activity light

The power indicator light on the back of the router (or on top for the E4200) indicates the status of Wi-Fi Protected Setup while you are connecting devices..

When Wi-Fi Protected Setup is connecting a network device, the light flashes slowly..

If there is an error, the light flashes quickly for two minutes.. Wait until it stops flashing, then try again..

When Wi-Fi Protected Setup has finished connecting a device, the light is continuously lit ..

Wait until the light is continuously lit before starting the next Wi-Fi Protected Setup session..

Improving Security

Connect network devices using one of the three methods below..

Note

Wi-Fi Protected Setup configures one device at a time.. Repeat the instructions for each device that supports Wi-Fi Protected Setup..

Connecting a device using the Wi-Fi Protected Setup button

Use this method if your device has a Wi-Fi Protected Setup button or prompts you to press the Wi-Fi Protected Setup button on your router..

To connect a device using the Wi-Fi Protected Setup button: Wireless > Basic Wireless Settings

1.Press the Wi-Fi Protected Setup button on the network device you are connecting to..

2.Press the Wi-Fi Protected Setup button on the back of the router..

- OR -

a.Log into the browser-based utility (see “How to open the browser- based utility” on page 25)..

b.Click the Wireless tab, then, if your router is not an E4200, click the Basic Wireless Settings page..

c.Click Wi-Fi Protected Setup..

d.Click the Wi-Fi Protected Setup button in the router’s Wi-Fi Protected Setup screen..

e.After the device has been configured, click OK..

43

Page 55
Image 55
Cisco Systems E1200 How to set up wireless security using Wi‑Fi Protected Setup, Wi-Fi Protected Setup activity light