Hard-Drive Indicator Patterns
Figure 6.
1. | 2. |
NOTE: If the hard drive is in Advanced Host Controller Interface (AHCI) mode, the status indicator (on the right side) does not function and remains off.
Indicator Pattern
(RAID Only)
Blinks green two Identifying drive or preparing for removal times per second
Off | Drive ready for insertion or removal |
NOTE: The drive status indicator remains off until all hard drives are initialized after the system is turned on. Drives are not ready for insertion or removal during this time.
Blinks green, amber, | Predicted drive failure |
and off |
|
Blinks amber four | Drive failed |
times per second |
|
Blinks green slowly | Drive rebuilding |
Steady green | Drive online |
Blinks green three | Rebuild aborted |
seconds, amber three |
|
seconds, and off six |
|
seconds |
|
15