Back-Panel Features And Indicators
Figure 7.
Figure 8.
Item | Indicator, Button, or | Icon | Description |
|
| Connector |
|
|
|
|
|
|
| |
1 | System identification button |
| The identification buttons on the front and back panels | |
|
|
| can be used to locate a particular system within a rack. | |
|
|
| PowerEdge R720 | When one of these buttons is |
|
|
|
| pressed, the LCD panel on the |
|
|
|
| front and the system status |
|
|
|
| indicator on the back flashes |
|
|
|
| until one of the buttons is |
|
|
|
| pressed again. |
|
|
| PowerEdge | When one of these buttons is |
|
|
| R720xd | pressed, the system status |
|
|
|
| indicator on the back flashes |
|
|
|
| until one of the buttons is |
|
|
|
| pressed again. |
|
|
| Press to toggle the system ID on and off. | |
|
|
| If the system stops responding during POST, press and | |
|
|
| hold the system ID button for more than five seconds to | |
|
|
| enter BIOS progress mode. | |
|
|
| To reset iDRAC (if not disabled in F2 iDRAC setup) press | |
|
|
| and hold the button for more than 15 seconds. | |
2 | System identification |
| Connects the optional system status indicator assembly | |
| connector |
| through the optional cable management arm. | |
3 | iDRAC7 Enterprise port |
| Dedicated management port. |
NOTE: The port is available for use only if the iDRAC7
Enterprise license is installed on your system.
16