Figure 71. Cabling
1. | PCIe card holder | 2. | |
3. | system board | 4. | integrated storage controller card |
5. | SAS connector on the system board | 6. | cable retention bracket |
7.x12 or x24
Installing The Optional Hard-Drive Backplane (Back)
NOTE: This procedure applies only to PowerEdge R720xd.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1.Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
2.Open the system.
3.Align the notches on the backplane with the notches on the chassis.
4.Lift the release pin and slide the backplane on the chassis until firmly seated.
5.Release the release pin to lock the backplane to the chassis.
113