JIMMY SERIES HYDRAULIC REBAR BENDERS — OPERATION

Figure 15. JB5135 Rebar Placement — Rebar Bending

Positioning the Rebar Bender (Method 3)

For Model JB5135

1.Place the pump control valve lever (Figure 8) in the neutral position.

2.Sendtheendofthespiralrebarthroughthegapinthepuller hook. Secure the puller hook around the straight rebar and align the puller rollers on the spiral rebar (Figure 15).

3.Place the pump control valve lever in the forward position.

4.Place and hold the toggle switch on the remote control unit (ON position). The rebar bending process should begin.

5.Activating the rebar bender will then cause the puller hook and cylinder to retract and curl the end of the spiral rebar up to 135° around the straight rebar.

6.When the desired angle has been achieved, release the toggle switch on the remote control unit.This will stop the retraction of the puller hook and cylinder.

7.To extend the puller hook and cylinder, place the pump control valve lever in the reverse/retract position.

8.To removethe rebar bender, place thepumpcontrol valve lever in the neutral position and lift the bender over the end of the rebar.

Figure 16. JB7135 Rebar Placement — Rebar Bending

Positioning the Rebar Bender (Method 4)

For Model JB7135

1.Place the pump control valve lever (Figure 8) in the neutral position.

2.Send the end of the spiral rebar through the gap between the puller hook and main roller. Rotate the main roller so that the main roller groove is in the 1 o’clock position. Secure the straight rebar in the main roller groove. Align the puller rollers on the spiral rebar (Figure 16).

3.Operate rebar bender as outlined in Method 3, steps 3 thru 8.

JIMMY SERIES HYDRAULIC REBAR BENDERS — OPERATION AND PARTS MANUAL — REV. #9 (01/04/08) — PAGE 18

Page 17 Page 19
Page 18
Image 18
Multiquip JB11090, JPU1, JB5090 Positioning the Rebar Bender Method For Model JB5135, JB5135 Rebar Placement Rebar Bending
Page 17 Page 19

JB7090, JB9180, JB5135, JB8090, JB7135 specifications

Multiquip is known for its robust line of construction equipment, and among its impressive offerings are the JB11090, JB9180, JPU1, JB8090, and JB5135 products. Each of these models showcases Multiquip's commitment to performance, durability, and innovative technology.

The JB11090 is engineered for versatility and power, featuring a powerful engine that provides reliable performance on the job site. This unit is particularly known for its excellent fuel efficiency, which makes it a cost-effective choice for contractors. Its compact design allows for easy maneuverability in tight spaces, enhancing productivity without compromising on power.

The JB9180 is a heavy-duty model designed for intensive tasks. It boasts advanced noise reduction technology, making it suitable for use in urban settings where noise regulations are stringent. This model prioritizes operator comfort with an ergonomic control system and an adjustable platform that helps minimize fatigue during long working hours.

Designed for high efficiency, the JPU1 model distinguishes itself with its innovative fuel management system. This technology optimizes fuel consumption and reduces emissions, promoting environmental sustainability. The JPU1 also features advanced safety mechanisms, including overload protection and automatic shut-off functionality, ensuring the safety of operators during operation.

Multiquip's JB8090 model offers exceptional reliability and is built for extreme conditions. With a robust chassis and reinforced parts, it withstands harsh environments while maintaining high performance. This model is equipped with features that enhance ease of maintenance, such as easy access to components and a user-friendly control panel.

Lastly, the JB5135 exemplifies versatility with its multifunctional capabilities. This model can easily adapt to various tasks, making it a favorite among contractors who face diverse project requirements. It is designed with cutting-edge technology that enhances control precision, allowing operators to achieve results with minimal effort.

In summary, the Multiquip JB11090, JB9180, JPU1, JB8090, and JB5135 are impressive machines that embody the brand's focus on efficiency, safety, and operator comfort. Each model is tailored to meet specific industry demands while incorporating innovative technologies that underscore Multiquip’s status as a leader in construction equipment. Whether you require power, versatility, or sustainability, these machines provide the performance needed to tackle any job effectively.
Top Page Image Contents