JIMMY SERIES HYDRAULIC REBAR BENDERS — RULES FOR SAFE OPERATION

 

DANGER

Read this manual!

 

 

 

 

 

Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only.

The following safety guidelines should always be used when operating the Jimmy Series Hydraulic Rebar Bender and

Electric-Hydraulic Pump.

GENERAL SAFETY

DO NOT operate or service this equipment before reading this entire manual.

This equipment should not be operated by persons under 18 years of age.

NEVER operate this equipment without proper protective clothing, shatterproof glasses, steel-toed boots, hard hat and other protective devices required by the job.

NEVER operate this equipment when not feeling well due to fatigue, illness or taking medicine.

NEVER operate this equipment under the influence of drugs or alcohol.

ALWAYS wear proper respiratory (mask), hearing and eye protection equipment when operating the rebar bender.

ALWAYS replace any worn or damaged warning decals.

Manufacturer does not assume responsibility for any accident due to equipment modifications.

NEVER use accessories or attachments, which are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

NEVER operate the rebar bender in an explosive atmosphere or near combustible materials. The possibility exists of the rebar bender emitting a spark during operation. A explosion or fire could result causing severe bodily harm or

even death if the sparks make contact with combustible or explosive materials.

Maintain this equipment in a safe operating condition at all times.

Keep bystanders, children and visitors away while operating the rebar bender. Distractions can cause you to lose control.

DO NOT wear loose clothing or jewelry.Contain long hair. Keep your hair, clothing, and gloves away from moving parts.

ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.

ALWAYS be sure the operator is familiar with proper safety precautions and operation techniques before using rebar bender.

ALWAYS keep work area clean and free of foreign matter and debris. Also keep work area well lit.

NEVER leave the rebar bender unattended.When not in use always unplug the rebar bender from power source.

Keep all inexperienced and unauthorized people away from the equipment at all times.

Become familiar with the components of the rebar bender before operating.

Use this rebar bender only for its intended purpose. DO NOT use this rebar bender for applications not recommended.

Inspect the rebar bender after each use. Replace any damaged or worn parts immediately. DO NOT use a defective rebar bender.

If a malfunction occurs, immediately unplug the rebar bender from the power source and correct the problem. If the problem can not be corrected, contact your nearest MQ service center.

All WARNING statements must be carefully observed to help prevent personal injury.

JIMMY SERIES HYDRAULIC REBAR BENDERS — OPERATION AND PARTS MANUAL — REV. #9 (01/04/08) — PAGE 6

Page 6
Image 6
Multiquip JB9180, JPU1, JB5090, JB11090, JB7135, JB8090, JB5135, JB7090 Read this manual, General Safety

JB7090, JB9180, JB5135, JB8090, JB7135 specifications

Multiquip is known for its robust line of construction equipment, and among its impressive offerings are the JB11090, JB9180, JPU1, JB8090, and JB5135 products. Each of these models showcases Multiquip's commitment to performance, durability, and innovative technology.

The JB11090 is engineered for versatility and power, featuring a powerful engine that provides reliable performance on the job site. This unit is particularly known for its excellent fuel efficiency, which makes it a cost-effective choice for contractors. Its compact design allows for easy maneuverability in tight spaces, enhancing productivity without compromising on power.

The JB9180 is a heavy-duty model designed for intensive tasks. It boasts advanced noise reduction technology, making it suitable for use in urban settings where noise regulations are stringent. This model prioritizes operator comfort with an ergonomic control system and an adjustable platform that helps minimize fatigue during long working hours.

Designed for high efficiency, the JPU1 model distinguishes itself with its innovative fuel management system. This technology optimizes fuel consumption and reduces emissions, promoting environmental sustainability. The JPU1 also features advanced safety mechanisms, including overload protection and automatic shut-off functionality, ensuring the safety of operators during operation.

Multiquip's JB8090 model offers exceptional reliability and is built for extreme conditions. With a robust chassis and reinforced parts, it withstands harsh environments while maintaining high performance. This model is equipped with features that enhance ease of maintenance, such as easy access to components and a user-friendly control panel.

Lastly, the JB5135 exemplifies versatility with its multifunctional capabilities. This model can easily adapt to various tasks, making it a favorite among contractors who face diverse project requirements. It is designed with cutting-edge technology that enhances control precision, allowing operators to achieve results with minimal effort.

In summary, the Multiquip JB11090, JB9180, JPU1, JB8090, and JB5135 are impressive machines that embody the brand's focus on efficiency, safety, and operator comfort. Each model is tailored to meet specific industry demands while incorporating innovative technologies that underscore Multiquip’s status as a leader in construction equipment. Whether you require power, versatility, or sustainability, these machines provide the performance needed to tackle any job effectively.