JIMMY SERIES HYDRAULIC REBAR BENDERS — COMPONENTS

Figure 6. Jimmy Hydraulic Rebar Bender Components

1. Remote Control Unit – Allows the hydraulic cylinder on the rebar unit to be advanced or held.

2. Remote Control Cable – Allows the Electric-Hydraulic Pump to be operated remotely.

3. Hydraulic Reservoir– Holds 1.00 gallon (3.78 liters) of hydraulic oil. Fill only with recommended type hydraulic oil.

4. Pump Control Lever – Move this lever to actuate the hydraulic cylinder on the rebar bender.The lever allows the cylinder to be advanced, held or returned.

5. Hydraulic Oil Fill Cap – Remove this cap to add hydraulic fluid to the reservoir. Fill with commercial hydraulic oil.

6. Electric-Hydraulic Pump/Carrying Handle – When transporting of the pump is required, always use the carrying handle or lifting bale to lift the unit.

7. Electric-Hydraulic Pump ON/OFF Switch – Move the toggle switch to the forward position to activate the electric motor. The electric motor will stay on as long as the switch is held. Release the switch to turn off the electric motor.

8. AC Power Cord – Plug this 10 ft. (3.0 meters) power cord into a 115 VAC grounded type receptacle. NEVER remove the ground pin from the plug. This will defeat the ground circuit and greatly increase the possibility of electrical shock.

9. Female Quick Disconnect Fitting – Connects to the hydraulic hose and allows for easy removal.

10. Hydraulic Hose (Rebar Bender) – Connect one end of this hose to the female quick disconnect fitting on the electric-hydraulic pump, connect the other end (90° fitting) to the hydraulic input port on the rebar bender cylinder.

11. Hose Cap – When the rebar bender is not in use, ALWAYS cover the hose’s male fitting with this cap. This will prevent dirt and foreign matter from entering the cylinder cavity.

12. Main and Upper Arm Rollers – Always keep large and small rollers clean and lubricated to insure smooth rolling. Remove any dirt or debris that may have accumulated on the rollers during operation.

13. Hydraulic Cylinder – When actuated can apply a force between 2~10 tons (2,032 ~10,160 kg.)

14. Rebar Adjustment Bolt – There is an adjustment bolt on the side plate of the rebar bender. Adjust these bolts to accommodate different size rebar.

15. Main Roller Shaft – To remove the large roller (main) or stuck rebar from the unit, push the roller shaft inward to release. Some units have a pin-clip mechanism for the removal of the main roller. See Figure 14.

16.Electric Motor On/Off Switch – When placed in the ON position, supplies 115VAC, 60Hz power to the electric motor.

17.Straightening Roller – Accessory roller for straightening rebar. For use with JB5090, JB7090, JB8090 only.

JIMMY SERIES HYDRAULIC REBAR BENDERS — OPERATION AND PARTS MANUAL — REV. #9 (01/04/08) — PAGE 13

Page 12 Page 14
Page 13
Image 13
Multiquip JB5135, JPU1, JB5090 Jimmy Series Hydraulic Rebar Benders Components, Jimmy Hydraulic Rebar Bender Components
Page 12 Page 14

JB7090, JB9180, JB5135, JB8090, JB7135 specifications

Multiquip is known for its robust line of construction equipment, and among its impressive offerings are the JB11090, JB9180, JPU1, JB8090, and JB5135 products. Each of these models showcases Multiquip's commitment to performance, durability, and innovative technology.

The JB11090 is engineered for versatility and power, featuring a powerful engine that provides reliable performance on the job site. This unit is particularly known for its excellent fuel efficiency, which makes it a cost-effective choice for contractors. Its compact design allows for easy maneuverability in tight spaces, enhancing productivity without compromising on power.

The JB9180 is a heavy-duty model designed for intensive tasks. It boasts advanced noise reduction technology, making it suitable for use in urban settings where noise regulations are stringent. This model prioritizes operator comfort with an ergonomic control system and an adjustable platform that helps minimize fatigue during long working hours.

Designed for high efficiency, the JPU1 model distinguishes itself with its innovative fuel management system. This technology optimizes fuel consumption and reduces emissions, promoting environmental sustainability. The JPU1 also features advanced safety mechanisms, including overload protection and automatic shut-off functionality, ensuring the safety of operators during operation.

Multiquip's JB8090 model offers exceptional reliability and is built for extreme conditions. With a robust chassis and reinforced parts, it withstands harsh environments while maintaining high performance. This model is equipped with features that enhance ease of maintenance, such as easy access to components and a user-friendly control panel.

Lastly, the JB5135 exemplifies versatility with its multifunctional capabilities. This model can easily adapt to various tasks, making it a favorite among contractors who face diverse project requirements. It is designed with cutting-edge technology that enhances control precision, allowing operators to achieve results with minimal effort.

In summary, the Multiquip JB11090, JB9180, JPU1, JB8090, and JB5135 are impressive machines that embody the brand's focus on efficiency, safety, and operator comfort. Each model is tailored to meet specific industry demands while incorporating innovative technologies that underscore Multiquip’s status as a leader in construction equipment. Whether you require power, versatility, or sustainability, these machines provide the performance needed to tackle any job effectively.
Top Page Image Contents