KD1800/KD6 — LOAD APPLICATION

Single Phase Load

Always be sure to check the nameplate on the generator and equipment to insure the wattage, amperage and frequency requirements are satisfactorily supplied by the generator for operating the equipment.

Generally, the wattage listed on the nameplate of the equipment is its rated output. Equipment may require 130— 150% more wattage than the rating on the nameplate, as the wattage is influenced by the efficiency, power factor and starting system of the equipment.

NOTE

If wattage is not given on the equipment's name plate, approximate wattage may be determined by multiplying nameplate voltage by the nameplate amperage.

WATTS = VOLTAGE x AMPERAGE

The power factor of this generator is 1.0. See Table 5 below when connecting loads.

zWhen connecting ordinary power tools, a capacity of up to the generating set’s rated output (kW) multiplied by 0.8 can be used.

zWhen connecting a resistance load such as an incandescent lamp or electric heater, a capacity of up to the generating set’s rated output (kW) can be used.

zWhen connecting a fluorescent or mercury lamp, a capacity of up to the generating set’s rated output (kW) multiplied by 0.6 can be used.

zWhen connecting an electric drill or other power tools, pay close attention to the required starting current capacity.

CAUTION:

Motors and motor-driven equipment draw much greater current for starting than during operation.

An inadequate size connecting cable which cannot carry the required load can cause a voltage drop which can burn out the appliance or tool and overheat the cable.

Table 5. Power Factor By Load

Type Of Load

Power Factor

 

 

Single-phase induction motors

0.4 - 0.75

 

 

Electric heaters, incandescent

1.0

lamps

 

 

 

Fluorescent lamps, mecury lamps

0.4 - 0.9

 

 

Electronic devices, communication

1.0

equipment

 

 

 

CAUTION:

Before connecting this generator to any building’s electrical system, a licensed electrician must install an isolation (transfer) switch. Serious injury or death may result without this transfer switch.

PAGE 24 —KD1800/KD6 A.C. GENERATOR— PARTS & OPERATION MANUAL — REV. #1 (06/16/05)

Page 23 Page 25
Page 24
Image 24
Multiquip operation manual KD1800/KD6 Load Application, Single Phase Load
Page 23 Page 25

KD6, KD1800 specifications

The Multiquip KD1800 and KD6 are robust, high-performance asphalt and concrete power trowels designed for professionals in the construction and masonry industries. These machines are engineered to deliver outstanding results while maintaining ease of use and operator comfort.

The KD1800 model features a powerful 18 horsepower engine, providing ample torque and efficiency for large-scale projects. Its balance of power and weight ensures optimal performance, allowing it to tackle even the most demanding surface finishes with precision. The KD1800 offers a blade diameter of 48 inches, making it ideal for expansive work areas. Its rotational speed is adjustable, enabling operators to customize the finishing process based on the specific requirements of their job.

In contrast, the KD6 is compact yet powerful, equipped with a reliable 6 horsepower engine. Tailored for smaller jobs or areas with limited access, it features a 36-inch blade diameter. The KD6 is designed for agility and maneuverability, making it a perfect choice for residential projects and tight spaces. Despite its size, the KD6 possesses sufficient power to deliver smooth, professional results on concrete surfaces.

Both models feature advanced technologies aimed at improving productivity and ease of operation. The adjustable handle height and tilt angle ensure ergonomic positioning for operators, preventing fatigue during extended use. The direct-drive system minimizes maintenance needs and enhances longevity, making both the KD1800 and KD6 low-maintenance solutions that deliver reliable performance.

Safety is paramount in the design of these trowels. Both models include protective features such as blade guards and anti-vibration systems to maximize operator comfort and safety. Furthermore, the KD1800 and KD6's user-friendly controls facilitate intuitive operation, allowing even less experienced operators to achieve high-quality finishes.

These power trowels are constructed from durable materials to withstand the rigors of daily use in the field. Their robust build quality means they can endure the harsh environments of construction sites while still delivering consistent performance.

In summary, whether you choose the Multiquip KD1800 for large-scale projects or the KD6 for smaller, more confined jobs, both power trowels promise exceptional performance, advanced features, and operator-friendly designs that make them invaluable tools for any professional contractor involved in concrete and asphalt finishing.
Top Page Image Contents